garageCube

Vezér needs to know if you want to send a parameter with a command explicitly, otherwise something like /surfaces/Quad-1/fx/FX_Type Color Controls could be a valid OSC address space.

Yes, using OSC output of Vezér, if the two computers are on the same network, Vezér will show both MadMapper instances and you'll be able to send OSC to each of them independently. You can even use a single OSC output if you want to control both MadMapper instances in the same way by using a broadc...

your link is a private video.

Ooops, sorry - it should be okay now.

Are you sure you selected MadMapper as the output of the OSC Value track ? I just checked and at first I thought it doesn't work because by default ezér assigns the output to "Vezér OSC Output 1" That does not really matter if MadMapper's OSC input using the same OSC port as "Vezér OSC Output 1" - ...

Update for the changes around OSC in Modul8 2.9: http://vezerapp.hu/blog/connect-vezer-t ... -with-osc/

Yes, you would not 2xODE and connect them to a network switch, or get an Art-Net node which has 2 universes output.

Cool, glad you figured it out! BTW, the upside down DIP Switch is pretty common unfortunately, sorry for not mention it earlier! Anyway, happy blinking

Hi, the positive/negative poles are important on the strip. You should be able to identify it, since that should be printed on the strip on every cut marks - check the attached picture. SMD3528 strips - usually - "negative controlled" which means they handle the PWM signal on the negative pole. So, ...

This is just a receiver for QC, but Vezér can send MIDI timecode: http://cogevj.hu/forums/viewtopic.php?f=14&t=1944#p5641

The weird thing is that if I use an address like /master/fadeToBlack with a timeline in Vezer with a float from 0 to 1, it works perfect and i get exactly what I want so I know the IP and ports are right. Did you test the preset selection within the same composition in Vezer where you checked out t...

It is designed to work with Vezer out of the box.

But it does not work as expected, If I don't miss something - at least with OSC learn function.

Vezér is on sale this week! http://vezerapp.hu/blog/vezers-birthday/

First of all, the strip requires only 3 wires, you are using 4...

Data should be connected to D0. GND to GND then 5V to DC+.

You could do that by using Vezér (www.vezerapp.hu) with MadMapper (1.6b) via OSC. Of course, if the 1.6b crashes for you its not the case, but I suggest to let the developers know about the crashing issue.