garageCube

You can make your surface group invisible, select all your cues and in "Edit Cues" mode you click the surface group visible button, so starting any of the cue will hide the surface group from the output. Then you make it visible only in the cue you want it visible (by changing the visible to "True" ...

You can do it in one click by selecting all scenes to modify and dragging the DMX fixtures on one of the selected scene cell

We haven't planned to handle dome projection. We have other priorities at the moment. Thanks for sharing your tips!

We have fixed this issue. We'll release MadMapper 5.5.6 with a bunch of fixes asap. Thanks!

In most cases when a surface is invisible and you make it slowly visible, you don't want to fade from its current visual / geometry / fx etc. but just fade the opacity with the new settings already applied. So in this case MadMapper skips fading all other surface settings. To avoid that just set the...

We would like to install an HDMI / DP / XX input card in the pc where we want to connect an external source like a pc or player You can use any input device that is supported by default video acquisition drivers on your platform. On macOS any device that appears in QuickTime (support of Apple AVFou...

Relative pathes should be handled properly. I remember we recently solved an issue when switch from macOS to Windows or something like that. Which version of MadMapper are you using ?

If the communication works with unicast but not with broadcast, then the issue is not coming from the ArtSync packet MadMapper sends. If the unicast table doesn't fill automatically and you have to enter IP addresses manually in MadMapper, it means that the ESP ArtNet library you're using doesn't ha...

FPS is dropping when doing what ? Dropping at which value ? Do you play movies ? Shaders ? What's your graphics card ? Drivers up to date ? On Windows if you have an integrated GPU (like an intel HD inside the CPU) and a discrete GPU (ie nVidia / AMD), you have to set the "Main Display" to a display...

- Does HC-SR04 work with Arduino? If not what other options are there? A few web search seems to say yes. But I have not read the articles. Have a look. - Any specific versions of Arduino UNO should I get? No - I want to keep the setting as compact as possible. Do I need the breadboard? If so is th...

There is no loop (except after very long run, like 12 hours, to keep enough floating point value precision to have a smooth animations)
But the idea is to have no loop. If you want to make a loopable movie out of it, you have to use a video editing software.

What do you mean by "input card" ?
Do you want MadMapper to send or receive an NDI stream ?
NDI is a network protocol so you generally just plug your computer to your local network to receive or send an NDI stream.

You have to set "Timing" to "Relative", disable "Link to Global BPM", then the signal frequency (oscillations per second) will be power of two of your speed, so speed = 1 => period 1 second, speed = 2 => frequency = 4 (period 1/4 second)... So for a period of 6 seconds, you need speed = sqrt(1/6) = ...

If your video projectors have a about the same luminosity response to input signal (gamma), it will work like that.

You can use the "Controls Combiner" module, you can assign your audio analysis channel to one of its input and use a Cue to change the Controls Combiner "mode" to switch from this input to another (like a multiplexer / switch)