garageCube

The miniMAD Light with unicast doesn't support devices that don't handle ArtNet polling (the ArtNet unicast table is not written to the miniMAD SD card)
What device are you using ?
Cheers

HAP is definitely the one. Set the number of chunks to 12 (if your exporter supports it).

Open the devices dialog (Cmd+D), be sure you activated the USB DMX device, and that the ArtNet device used is configured on the right universe number and on the right network adapter.

Yes it should work. Note that you shouldn't connect both cards with SLI (because only the outputs of one card are usable in this case)

Both Enttec DMX USB Pro & Enttec DMX USB Pro MK2 are supported (Mk2 is compatible with Pro)
Any Enttec Pro compatible USB DMX device is ok too (for instance DMX King eDMX2 Pro: https://dmxking.com/artnetsacn/edmx2-pro)

Which device is it ? Are drivers up to date ?
Which version of MadMapper are you running ? Are you up to date ?

No other software. garageCube LEDs are very light, but you have to check the motors specs.

Hi

> - I believe ISFs render upside down

Just tested and could reproduce. Do you have a sample file to reproduce ?

> - The "long' UI type dost respect the values field and returns the index regardless of values being set.

Indeed this is an issue. I add it to our bug tracker. Thanks for reporting

macOS or Windows ? We haven't release MadRouter for Windows at the moment, but it's free for all Mac users (from yourspace)
One line in MadRouter will do the job: /dmxin/ArtNet-0/[0-511] => /dmxout/Enttec Pro (....)/[0-512]. You can do it easiely from presets.

Weird. What if you click once (on the fullscreen window) ? Maybe another application has focus because it starts after MadMapper, even if MadMapper fullscreen is in front, if the other application is the active one, it will define the mouse cursor. Clicking on MM fullscreen will give the focus back ...

Hi, You don't need macOS or Quartz. MadMapper can send DMX the same way on Windows and macOS. The Quartz patch in this project was used to program very custom control, and useful because MadMapper didn't have Materials, multi-input & cues at this time, but with all those new features you can do many...

Going from 15 FPS to 60 FPS by disabling VSync is weird. Many people are using MM on Windows with nVidia and have not reported that. We personally have a bunch of PC laptops and desktops in the team and never saw that. Maybe you changed settings to force vertical sync in your nVidia control panel. A...

Hi, The selected network interface IP address is weird. I think you should just select the correct network interface in MadMapper Preferences / DMX output. Also when debugging, disable unicast so it removes one possible problem. When it work with broadcast, then go to unicast if you have many univer...

Today or tomorrow I hope. Just a matter of preparing few things. I PM you the download link right now.

Normally disabling vertical sync should have an effect if the DMX output frequency is higher than screen frequency. But if you're on Windows with an AMD card, vertical sync could be an issue, which will be solved in MadMapper 3.7.0 (about to be released, beta on yourspace). Is that your case ?