garageCube

eskatonia · by **eskatonia** » Fri Feb 17, 2006 2:01 am

well that sucks but thanks for clarifying... guess it just means any multiscreen installation needs to budget in a few scan converters as well

bratch · by **bratch** » Fri Feb 17, 2006 11:37 am

yves@garagecube wrote:
Bratch: Yes, you are right.

Well, this is such an awesome software !!! can't wait for the new release !!!

Vince911 · by **Vince911** » Tue Apr 25, 2006 4:07 pm

Is it possible to have multiple audio outputs, if i hook up an external audio card to my powerbook. seperating channel a from b.

lego_man · by **lego_man** » Wed Apr 26, 2006 9:10 am

http://www.garagecube.com/forum/viewtop ... 77&start=0

boris · by **boris** » Thu Apr 27, 2006 5:03 am

Here is a test with VJ legoman

With 5 low cost projectors, from one G5 and modul8 2.5 beta
5 output (VGA 800x600) total output resolution is 4000 x 600

bratch · by **bratch** » Thu Apr 27, 2006 10:52 am

Maybe i'm wrong but i think Vince911 was talking about multiple "AUDIO" output

boris · by **boris** » Thu Apr 27, 2006 11:28 am

No multiple audio outputs, sorry !

(Bratch, the original topic was about "video output")

Vince911 wrote:Is it possible to have multiple audio outputs, if i hook up an external audio card to my powerbook. seperating channel a from b.

Bucharest · by **Bucharest** » Tue May 02, 2006 10:30 pm

I like the screen set up.Can you tell me from where or what are you using for that,I want to have something similar with screens like in that picture.Can you help me.....please?
Thank you.
Cristian

m0l0p · by **m0l0p** » Tue May 09, 2006 6:02 pm

hello Boris

i have a dualcore twice 2.7GHZ which is not the very last G5 model
but just the one before the quads
i planned to add an AGP card (ATI RADEON X800 XT Mac Edition .
Legoman told me that multi outpout woiuld only run on pcixpress
G5 and i saw you affirmed that "In the next version 2.5 it will be possible to use multi output, but only with pci-express video card. (last G5 tower)."

on mine i can read about pciX and not PCIXpress
can you tell why it wouldn t work on such an equipment?
as i plan to buy a macbook soon
is it preferable to think about adding an xpressvideocard
by the pcmcia bus(i don t know if it already exists...)
or will i be forced to use the matrox converter?
i m preparing a performance for june and would really like to have
to have my setup ready before it
thanks by advance for answering

boris · by **boris** » Wed May 10, 2006 1:44 am

m0l0p wrote:hello Boris

i have a dualcore twice 2.7GHZ which is not the very last G5 model
but just the one before the quads
i planned to add an AGP card (ATI RADEON X800 XT Mac Edition .
Legoman told me that multi outpout woiuld only run on pcixpress
G5 and i saw you affirmed that "In the next version 2.5 it will be possible to use multi output, but only with pci-express video card. (last G5 tower)."

That's right !

Please note : G5 dualcore or quad tower have PCI-EXPRESS dual processor tower NOT (Is not the same).

by the way G5 dual processor tower have only ONE AGP slot (sorry) !
well, PCI bus is too slow for that, and I never found a PCI-X video card.

But, you can (i think) probably use one PCI card for the main interface WITHOUT preview and the two output from the AGP card, but is not very usefull (no preview).

Well, It works pretty well only with :

New G5 towers with PCI-EXPRESS
OR/AND MatroxDualhead2Go

-

vjfj · by **vjfj** » Wed May 10, 2006 8:54 am

yves@garagecube wrote:Eskatonia: From our test it was not possible to have two video outputs on the same Geforce 6600. You can have 1 VGA + 1 Video or 2 VGAs, but not 2 videos. Don't know if it is a hardware limitation.

Boris, i have the 6600 installed as a second card and a 7800GT as my primary card running the cinema display. the 6600 currently drives only a TV monitor (via DVI-S-video adapter on the second port) leaving the 1st port DVI free and the second DVI port on the 7800GT free.

theoretically i should be able to drive three VGAs off of the available outputs, right? however at present running the beta of 2.5 i'm finding that running anything only half way challenging in fx causes the 6600 output to go black or one layer to show as only white triangualr shape. is this *normal*? or am i missing something in the config?

this is only one TV screen at 800*600 res, so how would performance be affected when driving three external projectors?

thx

Bucharest · by **Bucharest** » Wed May 10, 2006 10:31 am

Hi Boris.......how is that possible to work with a MAC OS X (the dual head from Matrox) it is suporting only windows.Do they have one for MAC OS X too.......? Can you please help me out ,to figure that, why or how it's working with MAC's ?
Thank's

boris · by **boris** » Wed May 10, 2006 1:19 pm

Bucharest wrote:Hi Boris.......how is that possible to work with a MAC OS X (the dual head from Matrox) it is suporting only windows.Do they have one for MAC OS X too.......? Can you please help me out ,to figure that, why or how it's working with MAC's ?
Thank's

Yes it works with a mac

http://www.garagecube.com/forum/search.php?mode=results

=

http://www.garagecube.com/forum/viewtop ... ght=matrox
http://www.garagecube.com/forum/viewtop ... ght=matrox
http://www.garagecube.com/forum/viewtop ... ght=matrox
http://www.garagecube.com/forum/viewtop ... ght=matrox

Bucharest · by **Bucharest** » Thu May 11, 2006 7:01 am

Hi........
I found this -SideCar- for Mac,Plug-and-play: works with any PowerBook running Mac OS 9.X, Mac OS 10.2.8, Mac OS 10.3.3 or later
Requires only PowerBook or iBook with PC Card slot, it's very expensive but it's working http://www.digitaltigers.com/sidecar-mac.shtml
Cristian

boris · by **boris** » Thu May 11, 2006 1:34 pm

PCMCIA

I never tested, but I think it's too slow for that !

B.

Bucharest wrote:Hi........
I found this -SideCar- for Mac,Plug-and-play: works with any PowerBook running Mac OS 9.X, Mac OS 10.2.8, Mac OS 10.3.3 or later
Requires only PowerBook or iBook with PC Card slot, it's very expensive but it's working http://www.digitaltigers.com/sidecar-mac.shtml
Cristian

garageCube

Who is online