configure logitech attack 3 joystick with Junxion

General discuss about Modul8

Moderator: Garagecube

configure logitech attack 3 joystick with Junxion

Postby EasyLee » Wed Jan 11, 2012 9:57 pm

Hi there,

first of all this might be the wrong forum, but as far as I know, there is no Junxion forum. So I hope to find some answers here.
I'm trying to get my head around the configuration of my logitech attack 3 joystick with Junxion 4.6

For instance:
press button 1 >> x/y/z-axis of joystick change x/y/z-axis of selected layer in modul8
release button 1 >> x/y/z-axis of selected layer stay in current location
Whenever another button is pressed/released, another parameter in modul8 is altered [transformer, fx, color,... properties] through the x/y/z-axis of the joystick.

Through trail&error, I made some progress but didn't get near to what I imagined.
Any help is more then welcome!

Thanks in advance
User avatar
EasyLee
Junior Member
 
Posts: 2
Joined: Fri Nov 24, 2006 5:09 pm
Location: belgium

Re: configure logitech attack 3 joystick with Junxion

Postby vanakaru » Thu Jan 12, 2012 9:30 am

There are exellent tutorial videos on Junxion site. J is rather powerful tool, so it has many ways to get your result. I programmed the Attack following the tutorial with ease. If you get to the understanding of the program you can program very complex and precise results.
vanakaru
master
 
Posts: 669
Joined: Mon Sep 25, 2006 9:24 pm

Re: configure logitech attack 3 joystick with Junxion

Postby FranzKarl » Sat Jan 28, 2012 2:24 pm

hi ! I'm trying the JUNXION DEMO VERSION because I founded a LOGITECH EXTREME 3D PRO joystick and want to use it with modul8. I'm following the VIDEO TUTORIAL on STEIM
but in the junxion's pannel "Inputs HI Device Events" the joystick's raw data aren't changing when I use the buttons of the joy. However I can see the keyboard's values changing when I press keyboard's keys.

Is this a limitation of the demo or do I forget something ? :roll:
FranzKarl
Member
 
Posts: 14
Joined: Sat Jan 28, 2012 1:55 pm
Location: Fribourg, Switzerland

Re: configure logitech attack 3 joystick with Junxion

Postby vanakaru » Sat Jan 28, 2012 5:33 pm

Did you plug in your joystick>start Junxion>clicking on HID events?
I see all all buttons and controllers active with my Logitech Attack 3. I am not sure if all kinds of joysticks work with mac. This may be the issue here instead.

In demo mode you cannot save any setups, and the program will only work for 20 minutes every time you start it.
vanakaru
master
 
Posts: 669
Joined: Mon Sep 25, 2006 9:24 pm

Re: configure logitech attack 3 joystick with Junxion

Postby FranzKarl » Sat Jan 28, 2012 10:03 pm

Thx for your rapid answer !

Yes I do ! But no value changes ! I can see the name of the joystick in the JUNXION's HI Events panneI. I think the joystick works because I tried with USB OVERDRIVE and it works well. When I open JUNXION a message tell me that JUNXION will only work 2 hours per sessions.
FranzKarl
Member
 
Posts: 14
Joined: Sat Jan 28, 2012 1:55 pm
Location: Fribourg, Switzerland

Re: configure logitech attack 3 joystick with Junxion

Postby vanakaru » Sat Jan 28, 2012 10:46 pm

I have had some problems with other joysticks8than Attack 3), so it may still be the problem with yours and mac.
vanakaru
master
 
Posts: 669
Joined: Mon Sep 25, 2006 9:24 pm

Re: configure logitech attack 3 joystick with Junxion

Postby FranzKarl » Sat Jan 28, 2012 11:02 pm

you're probably right, I have to test JUNXION with another joystick before to continue, I come back here as soon as I have new results !
thank you very much vanakaru ! :o
FranzKarl
Member
 
Posts: 14
Joined: Sat Jan 28, 2012 1:55 pm
Location: Fribourg, Switzerland

Re: configure logitech attack 3 joystick with Junxion

Postby anomad » Sun Jan 29, 2012 1:19 am

. if you have an xbox 360 joystick (w/the USB port) - you can use Tatiebogle's xbox joystick to HID (http://tattiebogle.net/index.php/Projec ... /OsxDriver) driver *then* launch junXion and route the buttons and joysticks as MIDI to modul8.

. with most joysticks, they need to appear as a HID (human interface device) before junXion can use them

-james
(a nomad. )
anomad
master
 
Posts: 411
Joined: Sun Oct 21, 2007 10:07 pm
Location: north cakalacky, usa

Re: configure logitech attack 3 joystick with Junxion

Postby FranzKarl » Sun Jan 29, 2012 2:38 am

I have a PS3 >.<
FranzKarl
Member
 
Posts: 14
Joined: Sat Jan 28, 2012 1:55 pm
Location: Fribourg, Switzerland

Re: configure logitech attack 3 joystick with Junxion

Postby anomad » Sun Jan 29, 2012 3:40 am

. hmm. might already be supported - http://tattiebogle.net/index.php/Projec ... Controller ?

-james
(a nomad. )
anomad
master
 
Posts: 411
Joined: Sun Oct 21, 2007 10:07 pm
Location: north cakalacky, usa

Re: configure logitech attack 3 joystick with Junxion

Postby williamshaker » Wed Mar 09, 2016 7:49 am

I think the joystick works because I tried with USB OVERDRIVE and it works well.
williamshaker
Junior Member
 
Posts: 1
Joined: Wed Mar 09, 2016 7:47 am

Re: configure logitech attack 3 joystick with Junxion

Postby FranzKarl » Thu Mar 10, 2016 1:36 am

williamshaker wrote:I think the joystick works because I tried with USB OVERDRIVE and it works well.


Thank you ! l did other work since l tried this, but l'm going to keep your tip preciously because l want to take this back soon !
FranzKarl
Member
 
Posts: 14
Joined: Sat Jan 28, 2012 1:55 pm
Location: Fribourg, Switzerland


Return to Modul8 (General)

Who is online

Users browsing this forum: No registered users and 4 guests