ShuttleLoop_v1
  • User avatar
    klebowax
    member
    Posts: 23
    Joined: Sun Jan 30, 2005 11:52 am
    Location: the Hague
    Contact:

    ShuttleLoop_v1

    by klebowax » Sat Feb 26, 2005 12:27 pm

    Now we are talking!
    Again I have to say: really great those modules.
    What do you think, check the online library of modules and download the 'shuttleLoop_v1'?
  • User avatar
    klebowax
    member
    Posts: 23
    Joined: Sun Jan 30, 2005 11:52 am
    Location: the Hague
    Contact:

    by klebowax » Sat Feb 26, 2005 1:40 pm

    What I noticed
    when you use the shuttleLoop. it's active on all the layers.
    What I want is that I set one layer and then go to the next for a different setting.
    I was thinking:
    should I make for all the layers different variable then read what is the active layer and use those variable for example:
    spd_01 = 0.01
    spd_02 = 0.02 etc.
    the numbers 01, 02 are then the layers and so on.

    if layer 10 is selected than use variable spd_10

    I think this will work, but can someone tell me how to read the active layer? Is it with getValue?
    But than I'm getting a problem with moving the position of the layer?

    You read it, enough to figure out!
  • User avatar
    sigmasix
    master
    Posts: 1224
    Joined: Thu Dec 02, 2004 2:12 pm
    Location: gva | switzerland
    Contact:

    by sigmasix » Sat Feb 26, 2005 8:43 pm

    yo did a great work!! that's so useful! maybe we must make a big module together with shuttlecontrol ;) It's a bit stupid to have to modules with similar options... You can use my source if you want ;)
    btw, I have the same question about how to know wich layer is selected... But your idea to use variables for each layers is good!!
  • User avatar
    klebowax
    member
    Posts: 23
    Joined: Sun Jan 30, 2005 11:52 am
    Location: the Hague
    Contact:

    BigShuttleLoop

    by klebowax » Sat Feb 26, 2005 9:31 pm

    Those were also my thoughts. I started with the idea of one big module.
    But the sinus from in to out was a bit to must hard thinking this morning.

    Lets go for it, give me some days and I will fix the variable with differend layers. I hope ;-)
  • ilan

    by ilan » Sun Feb 27, 2005 7:02 am

    Great work! This was just what I was looking for!
  • User avatar
    chromafresh
    super8 member
    Posts: 144
    Joined: Wed Dec 01, 2004 11:39 am
    Location: Tokyo
    Contact:

    by chromafresh » Sun Feb 27, 2005 7:44 am

    Good job so far! I wish I could program python, I'd be spending all my time doing modules...
    Really what this needs is to have enough of BACF in it to tap BPMs to set the speed.
    If it could measure the footage length, and of course the length between "in" and "out" and set the speed to match the BPM, it would be even more useful!
  • User avatar
    yves@garagecube
    master
    Posts: 695
    Joined: Mon Jun 28, 2004 5:50 pm
    Location: Geneva
    Contact:

    by yves@garagecube » Mon Feb 28, 2005 5:25 pm

    Cool stuff ! Especially without a documentation! ;-)

    Yves.
  • User avatar
    klebowax
    member
    Posts: 23
    Joined: Sun Jan 30, 2005 11:52 am
    Location: the Hague
    Contact:

    by klebowax » Mon Feb 28, 2005 5:34 pm

    thanks,
    yves@garagecube wrote:Especially without a documentation! ;-)

    Maybe it's now possible yet, but how can i read which layer i have selected.

    Now i am busy with making your own presets in this module.
  • User avatar
    sigmasix
    master
    Posts: 1224
    Joined: Thu Dec 02, 2004 2:12 pm
    Location: gva | switzerland
    Contact:

    by sigmasix » Thu Mar 03, 2005 6:57 pm

    I had an idea, I didn't look at your code, but do you think (boris, is it possible?) you can add your in and out knob to the BACF module to have a sinus between half groupA and full goupB? (hum... do you understand?) That would be so useful if you want to keep the images of groupB and have a logo over with a kind of transparency
  • Akira
    ultim8 member
    Posts: 388
    Joined: Thu Aug 12, 2004 5:47 pm
    Location: Argentina

    by Akira » Fri Mar 04, 2005 10:01 pm

    Yy! My idea coming into fruition. I really need to shape up with the Python coding, I'm so slow.

    Thanks man for mking thism, it's very interesting.
  • Donleavy
    member
    Posts: 38
    Joined: Fri Mar 11, 2005 6:01 pm

    pingpong

    by Donleavy » Sun Mar 13, 2005 4:45 pm

    Thank you for ShuttleLoopp!!

    I wonder if it's possible to include a feature that enables the movie to go from A to B and then from B to A, so that the movie doesn't start from the beginning, but goes back and forth....

    Btw: I duplicated the ShuttleLoop 10 times and adjusted the layer number for each, so that I - when I open 10 Shuttleloops - have a ShuttleLoop controller for each layer...


    /Donleavy
  • User avatar
    sigmasix
    master
    Posts: 1224
    Joined: Thu Dec 02, 2004 2:12 pm
    Location: gva | switzerland
    Contact:

    Re: pingpong

    by sigmasix » Sun Mar 13, 2005 5:49 pm

    Donleavy wrote:Thank you for ShuttleLoopp!!

    Btw: I duplicated the ShuttleLoop 10 times and adjusted the layer number for each, so that I - when I open 10 Shuttleloops - have a ShuttleLoop controller for each layer...


    /Donleavy


    Yeah :P did you try to switch between layer sets? I think the shuttle loop will be apply to the layers of the other layer group :P ;) that's a kind of problem... :roll:
  • User avatar
    VJFranzK
    super8 member
    Posts: 106
    Joined: Wed Apr 06, 2005 12:25 pm
    Location: LA Area, USA
    Contact:

    Re: pingpong

    by VJFranzK » Thu Apr 07, 2005 4:51 am

    Donleavy wrote:I wonder if it's possible to include a feature that enables the movie to go from A to B and then from B to A, so that the movie doesn't start from the beginning, but goes back and forth....

    yes, that'd be REALLY good! ( looking into python, now... )

Who is online

Users browsing this forum: No registered users and 14 guests