Page 1 of 1

Modul8 - Lemur Template *update

Posted: Mon Mar 19, 2012 6:18 pm
by lamepantallas
I have updated my M8 template for Lemur iPad.

In my setup I use the following modules which have been included in the template:

LT´s QuickFX
LT´sLive Preview 4.7
Preview Window Mapper
BPM Global
BPM Master Router

http://liine.net/en/community/user-library/view/162/

Cheers from Honduras!

gabbo

Re: Modul8 - Lemur Template *update

Posted: Wed Mar 21, 2012 6:36 am
by Quickshift
Thanks!

This was a big help in getting my first template together, used a lot of your design and modified it to suit my needs :)

Question though, have u been able to get realtime feedback from modul8 to the iPad? i get feedback when it's requested, but i don't have buttons changing colors by themselves by anymeans with the 2Way Midi plugin.

Re: Modul8 - Lemur Template *update

Posted: Wed Mar 21, 2012 5:37 pm
by lamepantallas
Great! Share it when you have finished your template:)

Regarding feedback, I haven't been able yet, have not explored thoroughly

Cheers!

g.

Re: Modul8 - Lemur Template *update

Posted: Wed Jun 19, 2013 6:14 am
by zeburock
Hi,
I just found your template here for the lemur and modul8, was wondering if you have the midi mapping (exported from modul8)? Is that available for download too??
That'd be great - better than having to guess and map it.
Thanks! -Zeb

Re: Modul8 - Lemur Template *update

Posted: Wed Jun 19, 2013 2:49 pm
by broken
zeburock wrote:Hi,
I just found your template here for the lemur and modul8, was wondering if you have the midi mapping (exported from modul8)? Is that available for download too??
That'd be great - better than having to guess and map it.
Thanks! -Zeb

Pretty sure the mapping is done via OSC messages (built into the lemur template)

Should be able to just run the OSC module in modul8 (don't run the lemur daemon) and set the IP addresses and ports.

Re: Modul8 - Lemur Template *update

Posted: Mon Jun 24, 2013 10:58 pm
by zeburock
broken wrote:
zeburock wrote:Hi,
I just found your template here for the lemur and modul8, was wondering if you have the midi mapping (exported from modul8)? Is that available for download too??
That'd be great - better than having to guess and map it.
Thanks! -Zeb

Pretty sure the mapping is done via OSC messages (built into the lemur template)

Should be able to just run the OSC module in modul8 (don't run the lemur daemon) and set the IP addresses and ports.



Hey thanks for your reply - I finally got a chance to try this out. I could see midi coming in from the Lemur app using midi monitor, via OSC - but Modul8 wasn't responding with any parameter changes... yes I did have the OSC module open and running

Are you sure that is how it works? Can you try it, and if working post details about the setup, please?

Thanks again for your help so far, =Z

Re: Modul8 - Lemur Template *update

Posted: Tue Jun 25, 2013 3:54 pm
by broken
zeburock wrote:
broken wrote:
zeburock wrote:Hi,
I just found your template here for the lemur and modul8, was wondering if you have the midi mapping (exported from modul8)? Is that available for download too??
That'd be great - better than having to guess and map it.
Thanks! -Zeb

Pretty sure the mapping is done via OSC messages (built into the lemur template)

Should be able to just run the OSC module in modul8 (don't run the lemur daemon) and set the IP addresses and ports.



Hey thanks for your reply - I finally got a chance to try this out. I could see midi coming in from the Lemur app using midi monitor, via OSC - but Modul8 wasn't responding with any parameter changes... yes I did have the OSC module open and running

Are you sure that is how it works? Can you try it, and if working post details about the setup, please?

Thanks again for your help so far, =Z

My apologies.. I took a guess based on the steps I took with another lemur template and assumed this one would be the same.

I tried this one out and while modul8 receives the messages in the OSC log and transmits, the template does not control nor receive the modul8 interface with just the OSC module.
Perhaps Osculator is used in this instance to translate the messages rather than directly interfacing with modul8? Anyone know?

I personally use a modified version of this template - http://liine.net/en/community/user-library/view/301/ (had to remove the position controls as my syphon output is larger than it allows and it snaps back to the x/y of the ipad)
and can confirm it works great with just the OSC module.

Hope that helps, and sorry for the confusion!

Re: Modul8 - Lemur Template *update

Posted: Thu Jun 27, 2013 9:54 pm
by zeburock
broken wrote:I personally use a modified version of this template - http://liine.net/en/community/user-library/view/301/ (had to remove the position controls as my syphon output is larger than it allows and it snaps back to the x/y of the ipad)
and can confirm it works great with just the OSC module.

Hope that helps, and sorry for the confusion!



Hey thanks for confirming, too bad it doesn't seem to be ready and rigged... and thanks too for the great template reference. That does certainly look like a decent build, I'll give it a shot!
=Z

Re: Modul8 - Lemur Template *update

Posted: Thu Jun 19, 2014 3:40 pm
by fiumichino
Hi,

I confirm I have tried both versions of POPVJ-2.jzml and no one works on M8 v2.8, but they send/receive from the script output.

I´m using Wavilox.jzml and everything is ok.

Have you checked out your template?