. using OSC in modules (error? )
  • anomad
    master
    Posts: 411
    Joined: Sun Oct 21, 2007 10:07 pm
    Location: north cakalacky, usa
    Contact:

    . using OSC in modules (error? )

    by anomad » Tue Apr 07, 2015 9:08 pm

    . i've just downloaded Modul8 v2.9 and have been playing around with the built in OSC support. however, i'm getting some unexpected results and i'm not sure if i'm doing something wrong…

    . i've modified the OSC native (global) module and added some new code into DirectEvent

    . i then created a basic template in Touch OSC to send a button, fader, and toggle

    Code: Select all

    if oscReceive and type == 'OSC':
       
       addr = param['address']
       args   = param['args']
       
       if log : print "RECEIVE : ", param
       try:
           oscToModul8(param['address'], param['args'])
       except:
          pass
       
       if addr == '/1/push1' :
          modul8.setValue('ctrl_master_invColor', args ,10)
       if addr == '/1/fader1' :
          modul8.setValue('ctrl_layer_scale_uniform', args, 1)
       if addr == '/1/toggle1' :
          modul8.setValue('ctrl_layer_pixelFX_blurOn', args, 1)


    . the '/1/push1' works as expected, when i press the button the output is inverted and when i let it go, it goes back to normal - however, it leaves the 'INVERT' button on the GUI highlighted - (probably b/c it's just running invert_output_colorR/G/B ??)

    . however, '/1/fader1' causes the scale on layer 1 to jump to full and not move at all. when i run the log, the incoming data looks correct :

    Code: Select all

     RECEIVE :  {'timestamp': 978979.76699999999, 'args': [0.87362635135650635], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.78799999994, 'args': [0.86538463830947876], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.80099999998, 'args': [0.85439562797546387], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.81700000004, 'args': [0.84340661764144897], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.83400000003, 'args': [0.83241760730743408], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.85100000002, 'args': [0.82417583465576172], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.86699999997, 'args': [0.81868129968643188], 'address': '/1/fader1'}
    RECEIVE :  {'timestamp': 978979.88399999996, 'args': [0.81318682432174683], 'address': '/1/fader1'}


    . and toggle only turns something on, but never off even though it's sending 'address' as 0.0

    . am i missing something basic here ?


    -james
    (a nomad. )
  • anomad
    master
    Posts: 411
    Joined: Sun Oct 21, 2007 10:07 pm
    Location: north cakalacky, usa
    Contact:

    Re: . using OSC in modules (error? )

    by anomad » Wed Apr 08, 2015 3:16 am

    . d'oh ! it didn't occur to me that 'args' would be an array… :oops: it should be

    Code: Select all

    args   = param['args'][0]


    . and everything works as expected


    -james
    (a nomad. )

Who is online

Users browsing this forum: No registered users and 2 guests