Locked 4 posts Page 1 of 1
6 panels mapping
  • freeformer
    junior Member
    Posts: 2
    Joined: Tue Aug 20, 2013 4:33 pm

    6 panels mapping

    by freeformer » Tue Aug 20, 2013 4:42 pm

    hi
    i cant seem to find a link that can guide me for the following
    structure,
    6X window panels across 1MX4M per panel

    1. how do i assign madmapper to 2 projectors (A&B sides)
    2. A- left 3 panels
    3. B- right 3 panels
    4. i had animated my visuals base on 2048X768
    5. how do i assign parts of the animation to be played on single panel. Slicing the panoramic animation
    6. and how do i split my 2048X768 animation into 6 panels so its projected onto the separate panels.
    7. how do i ensure that A projector doesnt overlap with B projector

    be great if someone can advise on hardware and steps to achieve this result


    cheers
    ff
    Attachments
    skitched-20130820-174101.jpg
    skitched-20130820-174101.jpg (56.26 KiB) Viewed 2528 times
  • freeformer
    junior Member
    Posts: 2
    Joined: Tue Aug 20, 2013 4:33 pm

    Re: 6 panels mapping

    by freeformer » Tue Aug 20, 2013 5:32 pm

    i found the stitching part for 2 projectors in the madmapper manual.

    1. but how do i slice my animation into 6 panels separately?
    2. do i make the mask first while projecting?
    3. bring the mask in to mm as PNG
    4. and lay it out on the composition?

    Alternatvely
    1. can i set a 2048X768 composition on MM
    2. using slice to separate the panels?

    need help to know the proper steps in handling this.
  • User avatar
    sigmasix
    master
    Posts: 1210
    Joined: Thu Dec 02, 2004 2:12 pm
    Location: gva | switzerland
    Contact:

    Re: 6 panels mapping

    by sigmasix » Wed Aug 21, 2013 8:43 am

    it's very very very simple

    http://www.madmapper.com/basic-introduction/

    repeat the operation 6 times.

    the input size is defined by your media size, the output size is defined by the computer's output resolution. So you don't need to configure anything, it will take the dualhead resolution
  • franz
    madMapper master
    Posts: 620
    Joined: Fri Feb 18, 2005 7:05 pm
    Location: Paris, France
    Contact:

    Re: 6 panels mapping

    by franz » Wed Aug 28, 2013 12:36 pm

    note that if you have a Retina MBP, you won't need a triple/dual head hardware
    MadMapper version 1.5+ has multi output built in
Locked 4 posts Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest