ART-NET INTERFACE

Mad, Mad FAQ's

ART-NET INTERFACE

Postby jureeesh » Thu Mar 31, 2016 9:15 am

Please does anyone knows which supplier in europe sells ART-NET INTERFACE described in http://www.madmapper.com/controlling-le ... madmapper/.
Thank you
http://www.loop-video.hr/
jureeesh
Junior Member
 
Posts: 1
Joined: Thu Mar 31, 2016 8:55 am

Re: ART-NET INTERFACE

Postby Xaver2k » Thu Mar 31, 2016 10:28 am

there are so many post in this forum about this and i think you are in the wrong section two.

it depends about what you want to control, just regular rgb strips or digital strip and so on... the cheapest way is too order from china or take a look on ebay and so on.
Xaver2k
super8 member
 
Posts: 103
Joined: Thu Feb 20, 2014 11:23 pm
Location: Germany

Re: ART-NET INTERFACE

Postby broken » Fri Apr 01, 2016 4:42 am

Wouldn't bother with that unit.. I did the same thing.. scoured the internet for the parts shown (no links to products given) and was a bit of a waste.

There's much better options out there..

Instead I built a DIY unit with 2 circuit boards wired in series that had 9 channels on each. I used 12v RGB strips, but not "pixel mapping" ones, all pixels do the same colour.
Here's the boards I used - http://www.ebay.ca/itm/30CHANNEL-27CH-E ... SwA4dWMdRZ

If you want to do artnet for pixel mapping though - the parts on the tutorial from garagecube won't cut it.
I'd recommend something like this box - http://www.ebay.ca/itm/DMX-512-Art-Net- ... Sw14xWLLOt for ws2811, ws2812b, ws2801 strips
User avatar
broken
super8 member
 
Posts: 112
Joined: Sun Dec 23, 2012 11:44 pm
Location: canada


Return to MadMapper FAQ

Who is online

Users browsing this forum: No registered users and 2 guests