garageCube

[sintes]

MadMapper_2.1.0.5402_BETA how to set the SUB NET

[franz]

subnet * 16 + universe,
so sub 1/uni 1 = 1*16 + 1 = 17
(starting from 1, not 0)

[sintes]

AN6U1903
works only sub net 0 will no longer function. the device AN6U1903

[franz]

sorry I don't get it.
Could you elaborate ?

[sintes]

У меня 6 версий madmapper, теперь я перешел на 2 версию и все устройства перестали работать только из за того что у Вас пропал SUB NET, Я использую ws 2801, WS2811, WS2812 через AN6U1903, Помогите что мне делать дальше

I have 6 versions of madmapper, now I switched to version 2 and all the devices stopped working because You are missing a SUB NET, I use ws 2801, WS2811, WS2812 via AN6U1903 Help what do I do next

[sintes]

http://www.ebay.com/itm/DMX-ArtNet-netw ... 1181172896?

[franz]

this hardware is art net III compatible.
It will work ok with MM 2.1
What do you mean you're missing a subnet ?

There's no more subnets,
before you had: subnet 1 universe 1, now it is universe 17 (16*subnet number + universe number) for example

[sintes]

http://www.electronpoint.com/an6u1903_0 ... n_conf.gif

[mad-matt]

If your controller has universe number displayed as Net-Subnet-universe, the universe in MadMapper = Net * 256 + Sub-Net * 16 + Universe
That's a bit tricky. But controllers are more and more moving to have just a universe number.

[Cbnxxd]

Just a nice topic. www.coquegsm.com

[mad-matt]

For info, in 2.2.1 you'll see the subnet-universe decomposition displayed below the universe spin box. Release soon