Hello Guys,
I have posted before a question on how to synch 2 stations, with 2 Different MadMaper Licenses, And I was answered to use the MadRouter with OSC communication methods.
I went through all the configuration of the TouchOSC application, I was able to control directly my stations (independently), each one at a time while changing the settings on the App.
Things got a little bit more complicated when I started using the MadRouter. I read the manual of the MadRouter, proposed on the client's page, MadRouterDocumentation.pdf. I have created a new connection (attached: MRouter_OSC_Connection_Setup.png) and I was being able to see through the device monitor that only MadRouterOsc-station1 is responding to the calls from the TouchOSC App.
My question is: How should I configure the ports numbers, to be able to control from the TouchOSC app the two stations that I have them on the same network through the MadRouter.
In my case (referer to the attached images, each file has the name of its usage) I'm using two Mac Stations:
Station1: 192.168.1.100
Station2: 192.168.1.101 (in some cases I have tried 172.0.0.1 because the MadRouter is installed on station2)
iPhone: 192.168.1.102
the MadRouter is installed on Station2, is it a problem, to control MadMaper from the same machine as the router?
What should be the IP, port numbers, the connections and devices that i should create? should they have the same ports? or reversed between incoming of the stations equals to the outgoings of the MadRouter?
I'm a little bit lost and confused between the different Input ports, and Target ports configuration from the Madmappers side and the Router side.
Looking forward to some help,
Many thanks,
Issam