garageCube

Posted: **Wed Jan 02, 2019 8:06 pm**

Dear Forum,

I observe that madMapper is not sending the Synchronization Packet. As it does with Art-Net, sending the ArtSync, I am wondering why there is no E1.31 Synchronization Packet? This Synchronization Packet is very important for large installations.

Reference : ANSI E1.31 — 2018 Entertainment Technology Lightweight streaming protocol for transport of DMX512 using ACN
Document number: CP/2014-1009r6a

Thanks, Arjan
http://www.orangepi-dmx.org/allwinner-h3

Posted: **Thu Jan 03, 2019 1:05 am**

Hi Arjan,
I PM you, it should be easy to implement. It has never been requested, that's why it's not there...
Thx for the suggestion

Posted: **Thu Aug 15, 2019 5:14 pm**

For info SACN sync was added in MadMapper 3.6.6. It is supported by any later build.

Posted: **Sat Aug 24, 2019 3:58 am**

It is supported by any later build.
geometry dash

garageCube

sACN and Synchronization Packet (not sending)

sACN and Synchronization Packet (not sending)

Re: sACN and Synchronization Packet (not sending)

Re: sACN and Synchronization Packet (not sending)

Re: sACN and Synchronization Packet (not sending)