Are Madmapper sending OSC information?

Anything MadMapper oriented

Are Madmapper sending OSC information?

Postby fekril » Thu Nov 24, 2016 7:33 pm

Are Madmapper sending OSC information?

Ok to receive, but I can not find how to send it

I'm trying to do this with VEZER, it works with other software like Resolume, but Madmapper does not seem to send osc.

I Looking o/c on my computer with OSC DATA MONITOR imposible do see anything.

Are Madmapper realy able to send OSC information?
fekril
Junior Member
 
Posts: 9
Joined: Mon Dec 06, 2010 7:04 pm

Re: Are Madmapper sending OSC information?

Postby mad-matt » Thu Nov 24, 2016 10:51 pm

Hi,
MadMapper sends OSC for all assignments you created (see all in Controls dialog / OSC). For instance if you map OSC address "/toto" to "/surfaces/Quad 1/opacity", then when you change the opacity, MM will send the value on OSC address "/toto".
This is used for feedback. You have to specify the OSC feedback port in MM Preferences / OSC.
The default behavior of MM (OSC feedback mode "Auto") is to send OSC feedback to all OSC clients that sent any OSC message to MM. So MM keep the list of IP addresses from which it received OSC and will send feedback to each of those. You can also specify a custom IP address where MM should send OSC feedback (also in MM Preferences / OSC).
Does it help ?
mad-matt
MadMapper master
 
Posts: 310
Joined: Mon Sep 09, 2013 5:50 pm

Re: Are Madmapper sending OSC information?

Postby fekril » Fri Nov 25, 2016 12:54 pm

ok ok, OSC out must be patched with the famous "Control List", Thank's :D
fekril
Junior Member
 
Posts: 9
Joined: Mon Dec 06, 2010 7:04 pm

Re: Are Madmapper sending OSC information?

Postby mad-matt » Fri Nov 25, 2016 7:20 pm

Yes, we don't automatically send all changes in OSC. There are many conrols on each surfaces, when changing presets it would send hundreds of messages. It could be tested though, that might not be a problem...
mad-matt
MadMapper master
 
Posts: 310
Joined: Mon Sep 09, 2013 5:50 pm

Re: Are Madmapper sending OSC information?

Postby fekril » Sat Nov 26, 2016 12:40 pm

Yes it's good choice.

On the other hand I try your example with VEZER, and it record's OSC address "/ toto", but Madmapper does not understand it when it is returned. It seems to react only for "/ surfaces / Quad 1 / opacity".

I made these tests on betaRC2.
fekril
Junior Member
 
Posts: 9
Joined: Mon Dec 06, 2010 7:04 pm

Re: Are Madmapper sending OSC information?

Postby mad-matt » Sun Nov 27, 2016 10:00 pm

fekril wrote:On the other hand I try your example with VEZER, and it record's OSC address "/ toto", but Madmapper does not understand it when it is returned. It seems to react only for "/ surfaces / Quad 1 / opacity".


Are you sure you selected MadMapper as the output of the OSC Value track ? I just checked and at first I thought it doesn't work because by default ezér assigns the output to "Vezér OSC Output 1"
mad-matt
MadMapper master
 
Posts: 310
Joined: Mon Sep 09, 2013 5:50 pm

Re: Are Madmapper sending OSC information?

Postby fekril » Wed Nov 30, 2016 3:52 pm

Yes I'm sure
fekril
Junior Member
 
Posts: 9
Joined: Mon Dec 06, 2010 7:04 pm

Re: Are Madmapper sending OSC information?

Postby .lov._ » Wed Nov 30, 2016 4:27 pm

mad-matt wrote:Are you sure you selected MadMapper as the output of the OSC Value track ? I just checked and at first I thought it doesn't work because by default ezér assigns the output to "Vezér OSC Output 1"


That does not really matter if MadMapper's OSC input using the same OSC port as "Vezér OSC Output 1" - Vezér using port 8000 by default, as far as I know MadMapper using the same.

Just did a small test on my side, but seems to working on my side: https://www.youtube.com/watch?v=x551b0W ... e=youtu.be
Vezér - timeline and control software for visual artists
.lov._
Member
 
Posts: 16
Joined: Wed Jun 12, 2013 8:11 pm

Re: Are Madmapper sending OSC information?

Postby fekril » Thu Dec 01, 2016 3:46 pm

your link is a private video. :roll:
fekril
Junior Member
 
Posts: 9
Joined: Mon Dec 06, 2010 7:04 pm

Re: Are Madmapper sending OSC information?

Postby .lov._ » Thu Dec 01, 2016 4:08 pm

fekril wrote:your link is a private video. :roll:


Ooops, sorry - it should be okay now.
Vezér - timeline and control software for visual artists
.lov._
Member
 
Posts: 16
Joined: Wed Jun 12, 2013 8:11 pm

Re: Are Madmapper sending OSC information?

Postby fekril » Thu Dec 01, 2016 4:44 pm

NICE ! :D
fekril
Junior Member
 
Posts: 9
Joined: Mon Dec 06, 2010 7:04 pm


Return to MadMapper (General)

Who is online

Users browsing this forum: No registered users and 1 guest