garageCube

[AlexImix]

when I open saved project - mapped output doesn't match the object. I haven't mooved anything, neither changed anithing in setup. so everytime i open the project i have to remap it on the structure. and there is minor issue with cursor all the time: it appears as a cross (as in mask mode) not the arrow so i have to click on some tab of main menu to make it arrow.

[barneyb]

Maybe under menu output "stretch output" is by accident enabled or disabled ?

Cheers, Barney

[AlexImix]

Nope. stretching is switched off.

[pedrofx]

I was the same problem next weekend!!
The past session I must be remap my structures 3 times in 5 hours.
I had 8 presets with 10 layers and I was changed the map of same layer in the 8 presets all the nigth..
I didn't know why, but in 3 times when I changed my preset, the layer had change in all presets, it towards but small...
thanks!

[franz]

can you please send a step by step instructions on how to reproduce the problem to the support.
I haven't been able to reproduce ...

EDIT: i just tried again, and couldn't reproduce your problem.
One good practice, is to lock the surfaces once you know your setup is done. This way they won't move for sure.

[pedrofx]

Hi Franz,
I lock the surfaces but, if it are locked I can't play with the output off..
My problem was that one layer was changed the position and size two or three times in all presets...
I'm think that is possible I modified any parameter with the midi map...
Next weekend I'm other video set, I will say you if I will have any problem..
Thanks!

[TOOFERS]

I'm having the same problem, constantly having to remap.

Almost every time I open a saved project, a few of the quads have been changed, seemingly at random and without explanation

big headaches...

[Va.Ha.jr]

And I have the exact same problem...
Sometimes when I open the project and switch the presets, quads change the size and location. MadMapper 1.2.1

[nieto]

same problem !!!

[franz]

(un)fortunately, the same problem happened to me this week end.
It seemed related to the preset system.
We'll investigate on this and work on a fix.

[vj granda]

Same here, and last times I dont had presets...

Any news for a fix??? Thanks


Madmapper 1.2.1
MBP-OSX 10.6.8-i7_2.66GHz-4GB_1066MHz-7,200rpm- Nvidia GT330M_512MB

[boris]

Hi !

Yes we found and fixed the problem.
An update is planned before the end of August.

Thanks,
Boris.

Same here, and last times I dont had presets...

Any news for a fix??? Thanks


Madmapper 1.2.1
MBP-OSX 10.6.8-i7_2.66GHz-4GB_1066MHz-7,200rpm- Nvidia GT330M_512MB

[vj granda]

Thanks a lot Boris.