HDMI Capture dropping
  • Partyman
    member
    Posts: 10
    Joined: Sat Sep 09, 2017 5:28 pm

    HDMI Capture dropping

    by Partyman » Mon May 27, 2019 6:28 pm

    I have two different USB3.0 HDMI capture devices that both connect and work perfectly. The problem is that they lose connection after various amounts of time. I have gone into USB3.0 hub properties and selected to not allow it to turn off USB and I have also selected in Madmapper to keep the connection running. No matter what at some point the signal will stop streaming and the only way to get it back is to close and relaunch madmapper. Is there any way to keep this from happening and, or is there any way to get the signal back without a relaunch?
    Windows 10
    Intel i7
    16GB Ram
    Nvidia 960
  • mad-matt
    garageCube team
    Posts: 795
    Joined: Mon Sep 09, 2013 5:50 pm

    Re: HDMI Capture dropping

    by mad-matt » Tue May 28, 2019 9:40 am

    Which device is it ? Are drivers up to date ?
    Which version of MadMapper are you running ? Are you up to date ?
  • Partyman
    member
    Posts: 10
    Joined: Sat Sep 09, 2017 5:28 pm

    Re: HDMI Capture dropping

    by Partyman » Tue May 28, 2019 4:51 pm

    I have two different units and neither have brand names (one is Hornettek HT-VC01, other has no name markings https://www.amazon.com/if-link-Capture- ... merReviews).
    As far as I can tell they have no drivers and work with windows straight out of the package. I am using version 3.6.5
  • Partyman
    member
    Posts: 10
    Joined: Sat Sep 09, 2017 5:28 pm

    Re: HDMI Capture dropping

    by Partyman » Wed Jul 10, 2019 11:12 pm

    I still have not gotten any resolution to this problem. The worst part is having to shutdown and restart the program in the middle of an event to regain connection with the capture card.
    Is there any way (while madmapper is running) to do a resync with hardware?
    After testing the Capture cards with other software types I have determined this is not a Windows issue the disconnects only happen in Madmapper
  • franz
    madMapper master
    Posts: 747
    Joined: Fri Feb 18, 2005 7:05 pm
    Location: Paris, France
    Contact:

    Re: HDMI Capture dropping

    by franz » Wed Jul 17, 2019 1:48 pm

    mmm... have you tried with a branded capture card such as a blackmagic ?
    I'm afraid it might be difficult for us to support unbranded products,
    although we like the idea to be compatible with as many devices as possible.
  • mad-matt
    garageCube team
    Posts: 795
    Joined: Mon Sep 09, 2013 5:50 pm

    Re: HDMI Capture dropping

    by mad-matt » Tue Aug 06, 2019 1:52 pm

    Can you tell me which hardware you're using ? We'll buy one to debug this issue.
  • Partyman
    member
    Posts: 10
    Joined: Sat Sep 09, 2017 5:28 pm

    Re: HDMI Capture dropping

    by Partyman » Tue Aug 06, 2019 4:46 pm

  • mad-matt
    garageCube team
    Posts: 795
    Joined: Mon Sep 09, 2013 5:50 pm

    Re: HDMI Capture dropping

    by mad-matt » Thu Aug 08, 2019 9:36 am

    I ordered one. I'll get it on monday and will get back to you. Thanks

Who is online

Users browsing this forum: No registered users and 1 guest