garageCube

Hi,
I have a MAC STUDIO M2Max with a thunderbolt 3 SONNET ECHO EXPRESS IIIe chassis equipped with 2 Black Magic Decklink duo 2 PCIe cards.
MadMapper does not see black magic cards. I would like to assign MADMAPPER I/O to Black Magic Decklink SDI I/O.

MILLUMIN sees them as inputs and outputs.

Is there a solution or are BlackMagic cards just not compatible with MADMAPPER ?

Thanks.

By reading old posts, it appears that blacksyphon will allow me to recover inputs and outputs using SYPHON.
I will test tomorrow.
If anyone uses this method, I would like their opinion.

blacksyphon recovers decklink inputs well and can create siphon outputs to route them to decklink outputs.
Everything appears in siphon inputs/outputs in madmapper

It can therefore be an alternative solution for those who have encountered the same problem as me.

Enjoy!

We'll look at your issue, thanks for reporting

So,

First of all, thank you for the last update, the 2 BlackMagic Decklink duo 2 cards are recognized in inputs and outputs.

But...

Although I correctly recover the input streams (I can assign an input in a quad and I see my video stream), I do not recover anything in output by assigning the madmapper output to the SDI output of one of the decklink duo 2 where I connected a SAMSUNG TV monitoring screen.


The strangest thing is that, wanting to test in a different way, I connected a USB-C/HDMI adapter to the Macstudio to connect the SAMSUNG monitoring TV (recognized as a secondary screen by MAcOs) but assigning it as output to the MadMapper output, nothing either....

I checked my Madmapper configurations several times, everything seems good to me.

I did tests with Millumin with the same connections and everything works...

I'm lost...