garageCube

[soupvisuals]

for some reason suddenly on both my mackbook pro's when i fullscreen mad mapper it refuses to go to the projector screens but instead full screen the macbook's monitor. this is trying to use a tripplehead as a dualhead with resolution at 2048 x 768, which is whn the problem started.

[franz]

did you configure the output projector correctly via the output tab ?
Sometimes if you hot-plug/unplug a projector, MM 1.5.1 *might* loose its config.
(should be fixed in 1.5.2)
Does it also happen after a MM relaunch ?

[hdprojections]

Hello friends,

NEED HELP! I have the same problem, I just got a Macbook Pro retina and downloaded MM, but something weird happened after the second test. First test it worked fine, I got to map my room for the test and all worked OK; In the second test I used two projectors to test MM and when I changed the input to the other projector it happened, now I only see fullscreen on my laptop! then I tried to fix this by changing the resolution on both computer and MM but no luck, I restarted MM and my Mac but not luck! could somebody please help me to fix this problem. Thanks.

Will

[soupvisuals]

still having this issue, any thoughts?

[soupvisuals]

this is with madmapper 1.5.2
when i load it up normally the back screen(s) go black automatically, this is not happening.

I don't really care about the extra projector options unless that's screwing something up? i always made my shows works fine before that

[soupvisuals]

this is with madmapper 1.5.2
when i load it up normally the back screen(s) go black automatically, this is not happening.

I don't really care about the extra projector options unless that's screwing something up? i always made my shows works fine before that

[franz]

maybe your output is set to the main displpay (laptop)
go to the output/projector tab, select your output and set it to your prefferred projector (normally appearing in the list, if a display is connected)