Page 1 of 1
About LED strips
Posted: Sun Dec 29, 2013 9:29 pm
by kinksid
single color (3825) - L
RGB 3 colors (5050) - RBG
I tested already
but when i use the IC6803, dont have Slider effect
how to simulate shooting star, i mean, from first led to end
second,as MM dont support 2 universe, i wonder if series connection another DMX dimmer availabe???
let me know plz...
info@sueno.asia
Re: About LED strips
Posted: Mon Dec 30, 2013 7:38 pm
by NateMac
Are your LEDs chipped? (i.e. WS2811, WS2801, ect) It doesn't sound like they are. Your strip wire connections should be PWR,DATA,GROUND or PWR,DATA,CLOCK,GROUND.
MM does support Multiple Universes.
Re: About LED strips
Posted: Tue Dec 31, 2013 1:05 am
by aktion
Hey Nat,
If so .. I mean if lets say i have addressable Leds whats the process then ..
Re: About LED strips
Posted: Tue Dec 31, 2013 5:00 pm
by NateMac
Hey Nat,
If so .. I mean if lets say i have addressable Leds whats the process then ..
Do a search here and you'll find a lot of information on DMX Decoders & Encoders.
If you want something supported by GarageCube & 1024, look at the Enttec devices with a DMX Decoder.
I've been more interested in the Arduino method that combines the Encoder and Decoder into one device, but not to much support out there for it.
Re: About LED strips
Posted: Tue Jan 14, 2014 8:42 pm
by kinksid
Are your LEDs chipped? (i.e. WS2811, WS2801, ect) It doesn't sound like they are. Your strip wire connections should be PWR,DATA,GROUND or PWR,DATA,CLOCK,GROUND.
MM does support Multiple Universes.
LED strips:
http://trade.taobao.com/trade/detail/tr ... 9455993191
BUT!!!!! didnt have the shoot star effect.

DIMMER:
http://item.taobao.com/item.htm?id=26194728910
i want use its out to another input. havnt tested
any strips can do shoot star effect via PWR,DATA,GROUND
Re: About LED strips
Posted: Tue Jan 14, 2014 8:46 pm
by kinksid
Hey Nat,
If so .. I mean if lets say i have addressable Leds whats the process then ..
Do a search here and you'll find a lot of information on DMX Decoders & Encoders.
If you want something supported by GarageCube & 1024, look at the Enttec devices with a DMX Decoder.
I've been more interested in the Arduino method that combines the Encoder and Decoder into one device, but not to much support out there for it.
If u want a expended way -choose Arduino
Re: About LED strips
Posted: Thu Apr 10, 2014 7:05 pm
by axistudio
Are your LEDs chipped? (i.e. WS2811, WS2801, ect) It doesn't sound like they are. Your strip wire connections should be PWR,DATA,GROUND or PWR,DATA,CLOCK,GROUND.
MM does support Multiple Universes.
I am using chipped Led strip with the name of WS2811 and WS2801, i am using exactly same dmx decoder as the one you use. Only the enttec converter is a similar fake one that made in china.
http://item.taobao.com/item.htm?spm=a1z ... mm3h5ff6fd
when i connect whole things together, still no any positive result. i could only light up the WS2801 for only one time with only the red light on the strip. help me please!
Re: About LED strips
Posted: Fri Apr 11, 2014 8:28 am
by Xaver2k
@kinksid
the led strip looks like the digital ones, are you trying to use a digital leds strip with that controller?
if yes it could never work....
@axistudio
chipped leds are also called digital leds strips....
you can“t control them with this kind of controller because its only a dimmer for regular leds strips!