Page 1 of 1
					
				MIDI Triggering
				Posted: Tue Dec 08, 2015 2:46 am
				by nqeldridge
				I am trying to trigger the Play Forward button on a video by a MIDI note.  Yet, for some reason, I often have to send the note twice before the video plays.  Does anyone have an idea as to why this happens and what I can do to make the triggering more consistent?
			 
			
					
				Re: MIDI Triggering
				Posted: Wed Dec 09, 2015 5:37 pm
				by mad-matt
				I remember something has been fixed in there. Which version are you using ?
			 
			
					
				Re: MIDI Triggering
				Posted: Tue Dec 15, 2015 11:28 pm
				by nqeldridge
				I can confirm that it happens in the latest version 2.2.2, and it happens on different machines.
I am running El Capitan, not sure if that makes a difference.
			 
			
					
				Re: MIDI Triggering
				Posted: Wed Dec 16, 2015 2:08 pm
				by sigmasix
				maybe your controller has toggle buttons?!
			 
			
					
				Re: MIDI Triggering
				Posted: Thu Dec 17, 2015 1:43 pm
				by mad-matt
				Do you send a MIDI note off between two MIDI note on ?
If you send a MIDI note ON (with velocity != 0) MadMapper remains the current value of this note, if you send it again, it will not considered you pressed the key again. You need to send a note off inbetween.
			 
			
					
				Re: MIDI Triggering
				Posted: Fri Dec 18, 2015 3:29 am
				by nqeldridge
				I've tried several different solutions.
My goal is to use Ableton to send the MIDI notes to MadMapper.  Ableton is sending a note on and then a note off and yet it does not trigger the video.  Then I stop the track and start it over and the video triggers.
But the problem is not necessarily limited to Ableton.  If I plug in my MIDI keyboard, I have to press the mapped key twice before the video will trigger.
It is the strangest thing.  I may have to give in and put in a support ticket with the MadMapper folks.
			 
			
					
				Re: MIDI Triggering
				Posted: Fri Dec 18, 2015 10:47 am
				by mad-matt
				What version of MM are you running ?
			 
			
					
				Re: MIDI Triggering
				Posted: Mon Dec 21, 2015 8:16 pm
				by nqeldridge
				MM 2.2.2
			 
			
					
				Re: MIDI Triggering
				Posted: Tue Dec 22, 2015 3:37 pm
				by mad-matt
				Hi,
If you map your MIDI notes to /medias/MyMovie.mov/select your media will be applied to selected surfaces (like in this video): 
https://www.dropbox.com/s/krb7x43e2dxrk ... t.mov?dl=0You can select surfaces using the control /surfaces/MySurface/select or surfaces/MySurfaceGroup/select
You can also use the control that is on each surface to change the media of a specific surface or surface group: /surfaces/SurfaceName/mediaNumber. This can be driven by a MIDI CC.
Let me know if you have any problem
Matthieu - MM team
 
			
					
				Re: MIDI Triggering
				Posted: Tue Dec 22, 2015 9:06 pm
				by nqeldridge
				That solution seems to work.  I only need to use one video per song, so I can send a MIDI note to apply the video to the surface right as the song begins.
Thanks for the help on this!