MacBook over heating
  • stephan
    junior Member
    Posts: 4
    Joined: Thu Apr 07, 2016 12:24 am

    MacBook over heating

    by stephan » Thu Apr 07, 2016 12:30 am

    I am using a MacBook Pro (Retina, 15-inch, Mid 2015) with OS 10.10.5 to run Madmapper. I am projecting to 4 projectors. 3 using a Matrox TripleHead2Go DP Edition and 1 to HDMI. My MacBook seems to be able to handle the processing but you can hear the fans running and it gets hot. I need the projection to run for 2 hours.

    Can anyone suggest how to get my laptop to run not as hot?
  • franz
    madMapper master
    Posts: 753
    Joined: Fri Feb 18, 2005 7:05 pm
    Location: Paris, France
    Contact:

    Re: MacBook over heating

    by franz » Thu Apr 07, 2016 10:10 pm

    4 outputs that's a lot for your graphic card.... so it will naturally heat.
    However that shouldn't be problem, I've let mine overheat for hours .. it didn't melt.

    Letting some air flow underneath the bottom can be a good idea, but personally, usually I don't care.
    Eventually you could get a laptop cooler pad such as:
    https://www.google.fr/?client=safari#q= ... cooler+pad

    but you'll have to sacrifice on the style....
  • Xaver2k
    super8 member
    Posts: 103
    Joined: Thu Feb 20, 2014 11:23 pm
    Location: Germany

    Re: MacBook over heating

    by Xaver2k » Fri Apr 08, 2016 8:59 am

    hey stephan, as Franz said that´s totally normal.

    A Macbook can reach around 90° Celsius under load without getting any problems or lagging, and because of it´s aluminum housing the most of the heat comes to the outside and you might think it´s too hot, but it is fine ^^

    you can use software like smcfancontrol to monitor the temperature and fans. https://github.com/hholtmann/smcFanControl/releases

    if you still want to take care, just take a look at laptop cooling pads like these:
    https://www.google.de/search?q=laptop+cooler&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiEs_nNu_7LAhUJXiwKHR-4CpoQ_AUICCgC&biw=1366&bih=653

Who is online

Users browsing this forum: No registered users and 4 guests