Page 1 of 1

Arri skypanels on madmapper

Posted: Fri Jan 11, 2019 5:27 pm
by yonital
hello

i am trying to set up the arri SkyPanel on madmapper

can anyone help with custom fixture dmx process ?

thank you

yonatan

Re: Arri skypanels on madmapper

Posted: Sun Jan 13, 2019 10:48 pm
by mad-matt
Which model exactly ? We can post the fixture definition file, it's easy to do if you have the DMX patch PDF or webpage.

Re: Arri skypanels on madmapper

Posted: Mon Jan 14, 2019 11:14 am
by yonital
hello i need for all the SkyPanel models 60c,120c &360c here is arri pdf

there is a way to control each light engine in the same fixture (dmx mode 24 for 8 bit or mode 25 for 16 bit )

https://www.arri.com/resource/blob/6595 ... 8-data.pdf

thank you for your help

Re: Arri skypanels on madmapper

Posted: Tue Jan 15, 2019 11:15 pm
by mad-matt
I attached a fixture definition for Arri SkyPanel in Mode 1 with Extended Color Control activated in the DMX Settings of the panel. I haven't made the simplest but the best: when using red, only the red LEDs will light up, while when using a grey scale, only white LEDs will light up, when using a color between red and white, both red and white LEDs will light up half power. So when using a white, you get a pure white, not a mix of red, green and blue leds.
Let me know if everything is ok with it.

Re: Arri skypanels on madmapper

Posted: Wed Jan 16, 2019 8:29 am
by yonital
thank you so much, i will try it out soon in the studio