16-bit Pixel Type
  • impsnldavid
    junior Member
    Posts: 2
    Joined: Tue Aug 28, 2012 4:17 am

    16-bit Pixel Type

    by impsnldavid » Tue Aug 28, 2012 4:23 am

    Certain types of LED fixtures can operate in 8-bit or 16-bit modes, where when operating in 16-bit, each property (red, blue, green, white, intensity, etc.) occupies two DMX channels, a coarse and a fine. Whilst obviously when mapping from an 8-bit video source using 16-bit control is pointless, it would still be handy to have to option to specify this as a pixel type. There are lots of situations where it is impractical to change the operating mode of the fixture (there may not be time, the fixture may be rigged and inaccessible, or it may be being used by other systems) so the ability to address fixtures operating in this mode from MadMapper is needed.
  • franz
    madMapper master
    Posts: 626
    Joined: Fri Feb 18, 2005 7:05 pm
    Location: Paris, France
    Contact:

    Re: 16-bit Pixel Type

    by franz » Tue Aug 28, 2012 5:36 pm

    good remark.
    can you name any fixture that uses 16bit mode for RGB/Luminosity ?
    (it would be handy to get one for testing)

    at the moment, you can still use an offset in-between luma values, so that only the MSB (most significant bit) will be sent through artnet, hence reducing your 16bit value to half precision.
  • impsnldavid
    junior Member
    Posts: 2
    Joined: Tue Aug 28, 2012 4:17 am

    Re: 16-bit Pixel Type

    by impsnldavid » Thu Aug 30, 2012 5:41 am

    The PixelRange SmartLine fixtures have a 16-bit mode, http://www.pixelrange.com/pixelrange/index.php?id=3.
  • User avatar
    firionicable
    member
    Posts: 12
    Joined: Wed Oct 17, 2012 6:02 am

    Re: 16-bit Pixel Type

    by firionicable » Thu Oct 18, 2012 6:45 am

    Does this works best with garage Cube?
  • CaseyJScalf
    member
    Posts: 34
    Joined: Sat Nov 08, 2014 10:15 am

    Re: 16-bit Pixel Type

    by CaseyJScalf » Tue Aug 29, 2017 7:41 am

    I am curious how to interface with the pan and tilt of certain moving head lights.

    I understand there are only 8 bits of color coming in. 256 steps does not fit nicely into 360+ degrees of rotation.

    It looks a little jerky when controlling although very handy. Although other lighting software controls them butter smooth.

    How can I smooth out the pan and tilt? Use a 16 bit pixel type? But still, it is only coming in at 8 bits.

    How can this be resolved so I can run it all from 1 program, a la MadMapper?
  • mad-matt
    garageCube team
    Posts: 368
    Joined: Mon Sep 09, 2013 5:50 pm

    Re: 16-bit Pixel Type

    by mad-matt » Mon Oct 09, 2017 7:30 pm

    If you use materials on fixtures you are working with a floating point source (not a RGB 8 bits per component source, like images, movies or Syphon textures - they are 8 bpc in most cases but MadMapper supports other formats) - so you can have more than 8 bits precision in your source !

Who is online

Users browsing this forum: No registered users and 1 guest