Selecting Primary GPU
  • User avatar
    caneron
    activ8 member
    Posts: 94
    Joined: Tue May 28, 2019 9:01 pm

    Selecting Primary GPU

    by caneron » Tue Sep 03, 2019 8:23 pm

    Currently, MadMapper will alert you to tell you to make your primary system display using your best GPU, this is a great little reminder.

    However: in a setup where your control monitor is on a different card than on your outputs, it's quite troublesome because your system controls are all hidden behind of video display.

    The setup:
    8@4k out of 2x P4000 cards
    1@1080 out of the onboard card (for control)

    The workaround is to have all the windows you need open on the control monitor before you go into show-mode.

    It would be great if MadMapper allowed you to set which card you want for processing rather than using the system to make the choice for you!
    creative technology producer, designer
    🫠 https://www.vacationland.club
  • franz
    madMapper master
    Posts: 1033
    Joined: Fri Feb 18, 2005 7:05 pm
    Location: Paris, France
    Contact:

    Re: Selecting Primary GPU

    by franz » Wed Sep 04, 2019 10:14 am

    +1
  • User avatar
    caneron
    activ8 member
    Posts: 94
    Joined: Tue May 28, 2019 9:01 pm

    Re: Selecting Primary GPU

    by caneron » Thu Oct 17, 2019 6:53 pm

    Wanted to add that not having the primary monitor being the MadMapper control window means accessing other stuff in Full-Screen mode is impossible unless already up in that control display.
    creative technology producer, designer
    🫠 https://www.vacationland.club
  • aspeckmann
    junior Member
    Posts: 1
    Joined: Mon Jan 27, 2020 1:39 am

    Re: Selecting Primary GPU

    by aspeckmann » Mon Jan 27, 2020 2:39 am

    +1
  • tontechnik
    member
    Posts: 41
    Joined: Wed Sep 25, 2019 11:44 am
    Location: Bremerhaven

    Re: Selecting Primary GPU

    by tontechnik » Tue May 05, 2020 6:51 pm

    Currently, MadMapper will alert you to tell you to make your primary system display using your best GPU, this is a great little reminder.

    However: in a setup where your control monitor is on a different card than on your outputs, it's quite troublesome because your system controls are all hidden behind of video display.

    The setup:
    8@4k out of 2x P4000 cards
    1@1080 out of the onboard card (for control)

    The workaround is to have all the windows you need open on the control monitor before you go into show-mode.

    It would be great if MadMapper allowed you to set which card you want for processing rather than using the system to make the choice for you!
    +1

Who is online

Users browsing this forum: No registered users and 7 guests