garageCube

tdog · by **tdog** » Tue Jul 26, 2011 9:59 am

I use videoglide + XLR8 capture dongle in 2.6.2; works.

tdog

mr_coops · by **mr_coops** » Tue Jul 26, 2011 11:31 am

Tdog, I do have a usb dongle which works. What I'm wanting to do is reduce thje carrying of kit and set-up time. I'm always worried about dongles sitting on the back of desktops, to easily caught on wires etc in my opinion. also I'm hopingthat an on board capture will reduce lag issues.

vanakaru · by **vanakaru** » Tue Jul 26, 2011 8:53 pm

I do not have my Quicksilver at home to test. But I saw a bit of lag with this PCI card. At least not much better than USB dongle. But the point USB not being desirable capture option on these older tower is my experience as well.
Dod you find older version of Modul8.

mr_coops · by **mr_coops** » Wed Jul 27, 2011 11:09 am

Hi Vanakaru,
Yes lag and setting up speed (less kit to carry) is the point of the PCI card. I didn't find an older version of Modul8 yet, and I still need to raise a support ticket here via e-mail.
I was wondering this morning if it may be due to an updated driver from 5 squared
http://www.squared5.com/svideo/dc30-xact-mac.html
which does say it was updated to work with osx 10.5 Leopard. Maybe if I could trace and earlier inatance of the driver it may solve the issue. Or did you get your card to work with the latest driver with an older version of Modul8?

vanakaru · by **vanakaru** » Wed Jul 27, 2011 4:37 pm

I did not get Modul8 to work, but went with Isadora instead. I did not get macam drivers to work with Modul8 either.
I have DC30 1.6.1 from 2005. It is 500kb so I can just email it to you. Also I may find M8 v 2.5.4 if I dig around. I usually keep anything I download.

mr_coops · by **mr_coops** » Wed Jul 27, 2011 5:07 pm

That be awesome please check your PM's

mr_coops · by **mr_coops** » Mon Aug 01, 2011 11:52 pm

Vanakaru kindly sent me the modul8 2.5.4 file and I can confirm that this edition works with the current driver for the capture card DC30, This is fine for the interim...time to raise a support question I guess

Thanks for the help

vanakaru · by **vanakaru** » Tue Aug 02, 2011 9:07 am

Good, I hope we can sort this out. I shall update my support ticket.

mr_coops · by **mr_coops** » Wed Aug 03, 2011 12:13 pm

As was mentioned here...

There is a related ticket on the support about this. I have mentioned it to David and he is going to look into it. My apologies that our response on it has been delayed. David was on holidays. Programmers need those too.

My support question is now being looked at, so I'll post here any newws as and when I have it

fingers crossed

david · by **david** » Thu Nov 17, 2011 2:46 pm

Hi all,

we suspect that the new video capture device "auto allocation" of 2.6 is causing this problem.

If you have a device that is working with 2.5 and not working with 2.6, please contact me via support at garagecube dot com. I think we have a workaround and I need testers.

Regards.

David

garageCube

Re: Can you only capture video with firewire?

Who is online