garageCube

demon · by **demon** » Mon Oct 29, 2007 5:35 pm

hi,
it is possible make the sound input in modul8 by an external source line in?

thanks

mowgli_uk · by **mowgli_uk** » Mon Oct 29, 2007 5:44 pm

demon · by **demon** » Mon Oct 29, 2007 5:48 pm

but where i can set this preference?
in modul8 or in my mac system i must choose the sound in line?

thanks

Lupin · by **Lupin** » Mon Oct 29, 2007 6:07 pm

and if you want to route sounds from itunes or another sound software to M8 you can use soundflower :

http://www.cycling74.com/products/soundflower

demon · by **demon** » Mon Oct 29, 2007 6:11 pm

i want to connect the sound output of the audio mixer to my line in and modul8 must take the soun input from the line in

mowgli_uk · by **mowgli_uk** » Mon Oct 29, 2007 6:25 pm

system preferences/sound

Valparaiiso · by **Valparaiiso** » Tue Oct 30, 2007 3:24 pm

And then, don't forget to open the "sound level in" knob !

demon · by **demon** » Wed Oct 31, 2007 1:46 pm

sorry but modul8 doesn't work with the line in input.... i connect my ipod to line in but modul8 listen to only the microphone of my mac book pro

Lupin · by **Lupin** » Wed Oct 31, 2007 1:48 pm

then use soundFlower sound router to route sound from itunes to M8, if you haven't lost your ipod link cable hehe

demon · by **demon** » Wed Oct 31, 2007 1:53 pm

and with sound flower i can connect the line out signal of a mixer audio to line in of my mac book ... listen to in itunes and give the signal to modul(?

demon · by **demon** » Wed Oct 31, 2007 2:12 pm

Lupin wrote:then use soundFlower sound router to route sound from itunes to M8, if you haven't lost your ipod link cable hehe

i connect my ipod without usb cable but with a rca cable to the sound in line of my mac

i don't be able to disable the internal microphone of my mac book pro and give the input sound throw line in to modul8

mowgli_uk · by **mowgli_uk** » Wed Oct 31, 2007 2:21 pm

ok, I do this all the time and trust me, it works. Follow the instructions in this order:

1. connect your sound to your mac using the line port

2. open system preferences/sound/input -select line in and tweak the volume, you should see the input bouncing up and down. If you don't there is a problem with your mac's line input or with your sound source.

3. open modul8 and tweak the sound input knob, it is useful to have the soundviewer module open to see the level of the incoming signal.

That's it.

demon · by **demon** » Wed Oct 31, 2007 4:47 pm

ok, it works. thanks.
now the problem is with the quartz composer component : graphic equalizer.
it doesn't work with the line in input but only with the microphone input

methking · by **methking** » Fri Feb 06, 2009 2:28 am

mowgli_uk wrote:ok, I do this all the time and trust me, it works. Follow the instructions in this order:

1. connect your sound to your mac using the line port

2. open system preferences/sound/input -select line in and tweak the volume, you should see the input bouncing up and down. If you don't there is a problem with your mac's line input or with your sound source.

3. open modul8 and tweak the sound input knob, it is useful to have the soundviewer module open to see the level of the incoming signal.

That's it.

I've done this, and no dice. There's no problem with my input, I've used it to record dj sets a zillion time directly to the line in. I've tried tweaking the sound in knob in M8 to no avail. Is there something I'm missing?!?!?! Is there something i'm not doing correctly? i'm in this mood right now

got a show coming up tuesday.

mowgli_uk · by **mowgli_uk** » Sat Feb 07, 2009 4:32 pm

Follow the instructions in the right order ie-set you sound preferences BEFORE opening modul8

garageCube

sound input

Who is online