matrox triplehead2go analog: help mac software needed

Technical support for modul8

Moderator: Garagecube

matrox triplehead2go analog: help mac software needed

Postby studioo » Sun Aug 14, 2011 7:50 pm

hello together

i just got a matrox triplehead2go analog, but the software is only for windows.

so i`m not able to get a signal no left & right...

would be nice if someone can help me asap cause i need it for tonight :-(

thanks
patrick
studioo
Junior Member
 
Posts: 5
Joined: Mon Oct 04, 2010 9:52 pm

Postby Lupin » Sun Aug 14, 2011 8:41 pm

you don't need any driver for the TH2GO analog, check you VGA or DVI connection and check the length of your video cables
User avatar
Lupin
ultim8 member
 
Posts: 381
Joined: Fri Aug 18, 2006 12:37 pm
Location: France

Postby studioo » Sun Aug 14, 2011 8:50 pm

hello lupin

thanks for your info!

cool that i dont need a software

i definitly get no signal on left and right.
when i change the vga wires it`s still the same...
there is no signal on left and right. do i have to do some settings?


do you have any other idee?

thanks a lot for your help.
studioo
Junior Member
 
Posts: 5
Joined: Mon Oct 04, 2010 9:52 pm

Postby Lupin » Sun Aug 14, 2011 8:57 pm

do you have a wide screen resolution output when you check for secondary monitors list?
User avatar
Lupin
ultim8 member
 
Posts: 381
Joined: Fri Aug 18, 2006 12:37 pm
Location: France

Postby studioo » Sun Aug 14, 2011 9:16 pm

lupin

what i try is:

getting the center signal on the screens. that is fine.
beside that, i would like to map the same modul8 input by madpapper on some cubs.

my settings are:
sypon output on 640px x 480px

do handel that, i had the idee to use 2times the madmapper.
1 for the screens (with modul8 input)
1 for the cubes (same modul8 input)

thanks
studioo
Junior Member
 
Posts: 5
Joined: Mon Oct 04, 2010 9:52 pm

Postby deepvisual » Mon Aug 15, 2011 11:37 pm

set your output in OSX sys prefs
to something like 2400x600
or some other 4:1 ratio
User avatar
deepvisual
master
 
Posts: 401
Joined: Sun Dec 17, 2006 10:54 am
Location: London UK

Re: matrox triplehead2go analog: help mac software needed

Postby stephaniestep456 » Tue Nov 26, 2013 10:02 am

It would be wise if you can check the system requirements of matrox triplehead2go with the original equipment manufacturer and see whether if you have all the required features in your system. Such errors are mostly because of the configuration of system.



Thanks
snoringaidsnow.org
stephaniestep456
Junior Member
 
Posts: 3
Joined: Wed Sep 18, 2013 7:31 am

Re: matrox triplehead2go analog: help mac software needed

Postby vanakaru » Tue Nov 26, 2013 3:38 pm

Do you understand how this works. You send triple wide video 1920(3x640)x480 and th2go will split this into 3 monitors 640x480 each. If you send just 640x480 you get just the middle monitor showing the video bacause you do not have any content on the side monitors.
vanakaru
master
 
Posts: 669
Joined: Mon Sep 25, 2006 9:24 pm

Re: matrox triplehead2go analog: help mac software needed

Postby james442 » Tue Feb 16, 2016 8:51 am

you don't need any driver for the TH2GO analog, check you VGA or DVI connection and check the length of your video cables
james442
Junior Member
 
Posts: 1
Joined: Tue Feb 16, 2016 8:50 am


Return to Modul8 Support

Who is online

Users browsing this forum: Google [Bot] and 2 guests