minimad new image 3.2 keeps crashing
  • balamsoto
    member
    Posts: 30
    Joined: Thu Feb 05, 2015 8:13 pm

    minimad new image 3.2 keeps crashing

    by balamsoto » Thu Dec 21, 2017 7:05 pm

    have a minimad 16 gigs
    download the 16 gigs image and flash the sdcard no problem
    went thru the set up process fine ( red, y,green buttons )
    remove card from mini and export an exsiting project that worked fine with previous
    image
    boot the minidad / minimad keeps rebooting over and over

    Image 3.1 worked with the same project file


    any solutions?
    are other user having same issue?
  • Pierre Guilluy
    garageCube team
    Posts: 239
    Joined: Mon Oct 12, 2015 1:50 pm

    Re: minimad new image 3.2 keeps crashing

    by Pierre Guilluy » Fri Dec 22, 2017 10:30 am

    We've noticed a problem with MadMapper 3.2 build and we'll release MadMapper 3.2.1 asap today.
  • Pierre Guilluy
    garageCube team
    Posts: 239
    Joined: Mon Oct 12, 2015 1:50 pm

    Re: minimad new image 3.2 keeps crashing

    by Pierre Guilluy » Fri Dec 22, 2017 11:17 am

    MadMapper 3.2.1 with fixes for the miniMAD is now available for download on Yourspace:
    http://madmapper.com/yourspace/
  • Pierre Guilluy
    garageCube team
    Posts: 239
    Joined: Mon Oct 12, 2015 1:50 pm

    Re: minimad new image 3.2 keeps crashing

    by Pierre Guilluy » Tue Jan 16, 2018 11:03 am

    MadMapper 3.2.2 comes another miniMAD update fix.
    It should work for everybody now.
  • User avatar
    melting
    member
    Posts: 16
    Joined: Thu Sep 29, 2016 5:30 pm

    Re: minimad new image 3.2 keeps crashing

    by melting » Thu Jan 18, 2018 10:51 pm

    Hy,

    I just updated to Madmapper 3.2.2

    While exporting to minimad, the update of the card went fine, but is still crashing when i put it the minimad
    This is the line where it always blocks ...same in another minimad
    [ 4.358179] ——-[ end Kernel panic - not syncing : UFS : Unable to mount root fs on unknown-block(179,2)

    NB : i have another card, it works fine
  • Pierre Guilluy
    garageCube team
    Posts: 239
    Joined: Mon Oct 12, 2015 1:50 pm

    Re: minimad new image 3.2 keeps crashing

    by Pierre Guilluy » Fri Jan 19, 2018 10:54 am

    The kernel panic message means the system got somehow corrupted.

    You can either duplicate your working SD-card or flash it using the official SD-card image.
    You'll find the necessary files and instructions on Yourspace.
  • User avatar
    melting
    member
    Posts: 16
    Joined: Thu Sep 29, 2016 5:30 pm

    Re: minimad new image 3.2 keeps crashing

    by melting » Tue Jan 23, 2018 12:48 am

    Hi,

    Thanx, i tried with Etcher 1.2.1 and with the latest 16GB Disk-image, both downloaded from yourspace.

    With a 16GB card, Etcher says that the card is too small for the image !?
  • Pierre Guilluy
    garageCube team
    Posts: 239
    Joined: Mon Oct 12, 2015 1:50 pm

    Re: minimad new image 3.2 keeps crashing

    by Pierre Guilluy » Tue Jan 23, 2018 4:03 pm

    My bad, the SD-cards shipped with the latest miniMAD are slightly smaller than the previous, hence an adaptation of the image has been necessary, but I forgot to change the link to the 16GB image on Yourspace...

    Sorry for that.

    I just fixed it, so please download the image again and you should be able to flash the new image to your card.
  • User avatar
    melting
    member
    Posts: 16
    Joined: Thu Sep 29, 2016 5:30 pm

    Re: minimad new image 3.2 keeps crashing

    by melting » Thu Feb 01, 2018 1:21 am

    yep, ok now, works fine
    thx

Who is online

Users browsing this forum: No registered users and 1 guest