garageCube

Posted: **Tue Mar 16, 2021 8:53 pm**

I have a minimad today I donwload the new image V4 and after installing ( 3 times ) I get error after madmaper logo : Hardware unsupported.
please advice

Posted: **Wed Mar 17, 2021 1:17 pm**

here's a direct link for the 8gb image : https://www.dropbox.com/s/icay2ylhq6x7n ... g.zip?dl=0
for the 16gb image : https://www.dropbox.com/s/9rr7iezi2l249 ... g.zip?dl=0

next step will be to flash again the sd card following properly the manual's procedure

also feel free to contact the support via support@garagecube.com providing :
- your MadMapper version
- your computer and OS specs
- screenshots of the error
- screenshots of your projector and sd card export settings in MadMapper (assuming you'll try to export a project)

Posted: **Thu Mar 18, 2021 1:57 pm**

Are you using a genuine MiniMad?

Posted: **Thu Mar 18, 2021 4:06 pm**

Are you using a genuine MiniMad?

Yes.

Posted: **Thu Mar 18, 2021 5:32 pm**

here's a direct link for the 8gb image : https://www.dropbox.com/s/icay2ylhq6x7n ... g.zip?dl=0
for the 16gb image : https://www.dropbox.com/s/9rr7iezi2l249 ... g.zip?dl=0

next step will be to flash again the sd card following properly the manual's procedure

also feel free to contact the support via support@garagecube.com providing :
- your MadMapper version
- your computer and OS specs
- screenshots of the error
- screenshots of your projector and sd card export settings in MadMapper (assuming you'll try to export a project)

same problem! using the old image 3.x it works fine but not the new 4.0. please advice

Posted: **Mon Mar 22, 2021 3:01 pm**

please contact the support via support@garagecube.com then

garageCube

MiniMad image v 4 error

MiniMad image v 4 error

Re: MiniMad image v 4 error

Re: MiniMad image v 4 error

Re: MiniMad image v 4 error

Re: MiniMad image v 4 error

Re: MiniMad image v 4 error