matrox triplehead2go analog: help mac software needed
  • studioo
    junior Member
    Posts: 5
    Joined: Mon Oct 04, 2010 9:52 pm

    matrox triplehead2go analog: help mac software needed

    by studioo » Sun Aug 14, 2011 7:50 pm

    hello together

    i just got a matrox triplehead2go analog, but the software is only for windows.

    so i`m not able to get a signal no left & right...

    would be nice if someone can help me asap cause i need it for tonight :-(

    thanks
    patrick
  • Lupin
    garageCube team
    Posts: 383
    Joined: Fri Aug 18, 2006 12:37 pm
    Location: France
    Contact:

    by Lupin » Sun Aug 14, 2011 8:41 pm

    you don't need any driver for the TH2GO analog, check you VGA or DVI connection and check the length of your video cables
    Gael Abegg Gauthey (former known as Lupin)
    https://www.linkedin.com/in/abegg-gauthey/
  • studioo
    junior Member
    Posts: 5
    Joined: Mon Oct 04, 2010 9:52 pm

    by studioo » Sun Aug 14, 2011 8:50 pm

    hello lupin

    thanks for your info!

    cool that i dont need a software

    i definitly get no signal on left and right.
    when i change the vga wires it`s still the same...
    there is no signal on left and right. do i have to do some settings?


    do you have any other idee?

    thanks a lot for your help.
  • Lupin
    garageCube team
    Posts: 383
    Joined: Fri Aug 18, 2006 12:37 pm
    Location: France
    Contact:

    by Lupin » Sun Aug 14, 2011 8:57 pm

    do you have a wide screen resolution output when you check for secondary monitors list?
    Gael Abegg Gauthey (former known as Lupin)
    https://www.linkedin.com/in/abegg-gauthey/
  • studioo
    junior Member
    Posts: 5
    Joined: Mon Oct 04, 2010 9:52 pm

    by studioo » Sun Aug 14, 2011 9:16 pm

    lupin

    what i try is:

    getting the center signal on the screens. that is fine.
    beside that, i would like to map the same modul8 input by madpapper on some cubs.

    my settings are:
    sypon output on 640px x 480px

    do handel that, i had the idee to use 2times the madmapper.
    1 for the screens (with modul8 input)
    1 for the cubes (same modul8 input)

    thanks
  • User avatar
    deepvisual
    master
    Posts: 402
    Joined: Sun Dec 17, 2006 10:54 am
    Location: London UK
    Contact:

    by deepvisual » Mon Aug 15, 2011 11:37 pm

    set your output in OSX sys prefs
    to something like 2400x600
    or some other 4:1 ratio
  • stephaniestep456
    junior Member
    Posts: 3
    Joined: Wed Sep 18, 2013 7:31 am

    Re: matrox triplehead2go analog: help mac software needed

    by stephaniestep456 » Tue Nov 26, 2013 10:02 am

    It would be wise if you can check the system requirements of matrox triplehead2go with the original equipment manufacturer and see whether if you have all the required features in your system. Such errors are mostly because of the configuration of system.



    Thanks
    snoringaidsnow.org
  • vanakaru
    master
    Posts: 669
    Joined: Mon Sep 25, 2006 9:24 pm

    Re: matrox triplehead2go analog: help mac software needed

    by vanakaru » Tue Nov 26, 2013 3:38 pm

    Do you understand how this works. You send triple wide video 1920(3x640)x480 and th2go will split this into 3 monitors 640x480 each. If you send just 640x480 you get just the middle monitor showing the video bacause you do not have any content on the side monitors.
  • james442
    junior Member
    Posts: 1
    Joined: Tue Feb 16, 2016 8:50 am

    Re: matrox triplehead2go analog: help mac software needed

    by james442 » Tue Feb 16, 2016 8:51 am

    you don't need any driver for the TH2GO analog, check you VGA or DVI connection and check the length of your video cables

Who is online

Users browsing this forum: No registered users and 14 guests