Just to make things clearer for me, the MM Station1 & 2 port 8002, is the incoming port number right?
MadMapper on Station1: use port 8002
MadMapper on Station2: use port 8002
MadRouter: use port 8001
In Touch OSC you select MadRouter as output.
In MadRouter, you will create two OSC output: in the Devices Dialog (menu Tools / Show Devices):
- press "New" (bottom right) and choose "Osc Device", set name "MadMapper1"
- select the device "MadMapper1" in the list and press "Device Setup", set the "OSC Target Port" to 8002 and "OSC Target IP" to the IP of Station1
- same for "MadMapper2" except you put the IP of Station2
Do you know what are the minimum requirements for a "Powerful" machine? That will be able to handle 2 Matrox TripleHead2Go, with 6 videos (1920x1080) played from a single MadMapper?First remark: if you have a powerful machine you could connect the two TripleHead2Go to the same computer... Except if you're using GPU intensive materials (like clouds) and you really need full resolution.
TO avoid extra problems, I have shifted my installation to use raspberry pi3, with an image of the MiniMad or the default OS Raspberian. but now I have found that the MiniMad is compatible only with pi2 (last information was in 2017) I hope you have updated this issue...If it was a performance issue you would have frame drops (less than the FPS of the content you're using), here it looks like you're having OpenGL issues. Maybe the you get out of VRAM (256 MB might not be enough).
If you're using a Hackintosh, then that could be a driver issue. Be sure to use the macOS driver, there might be some issues with the nVidia web driver, we haven't tested each version enough to guarantee everything's ok with this driver.
First thing I would do it to test with 2 triple heads on this machine. For the medias, use HAP codec or H264, do some tests to see which codec works better in your configuration (HAP will be hardware decoded by default, while H264 not until you activate the "Enable Hardware Acceleration" option).
Users browsing this forum: No registered users and 1 guest