garageCube

[simonhu]

Hello
We have an upcoming installation for total 5 projectors with WUXGA resolution per output.
What is the best hardware setup for a fix installation with 24/7 running time.

Our preferred machine
Win10 LTSC
I7 CPU i7-10700K
GPU 2x RTX 4000
Blackmagic Design DeckLink Mini Recorder 4K
nVidia Quadro Sync II

We need to make sure that the output destinations refers always to the same projector (EDID). GPU1 has 3 projectors for room 1 and GPU2 has 2 projectors for room 2.
We want to use an external HDMi source for 1 Quad in Madmapper. Therefore we need the Blackmagic Input Card.

Any other advices or maybe better configuration?
Thank you

[mad-matt]

That should be perfect. MadMapper uses EDID when available on Windows. So swapping the cables or rebooting windows should affect where MadMapper will output which content.
Some identical screens will give the same EDID serial, but a good video projector should not. If it's the case, a cheap EDID manager would solve, ie: https://www.amazon.com/Zerone-Feeader-M ... ics&sr=1-5

[tontechnik]

So Multi-GPU is now possible with MM??? That seems to be new to me...