by imflex » Sun Apr 17, 2022 10:56 pm
Hi, I'm having the same problems. So my setup is x2 LaserCube Pro 2.5W and LaserCube USB 1W. Previously tried on ver 5.0.2 (windows), was ok after changing the IP of LaserCube Pro 2.5W, 1 is default (192.168.1.1) and 2nd one (192.168.1.10). After upgrading to ver 5.0.7(windows and m1 mac) it no longer reads the LaserCube Pro 2.5W as 2 separate ones. No problem connecting 1 Pro and 1 USB. but when connecting 2 Pros, you get to see it on the drop down box, but when trying to Arm laser using the test pattern, it comes out gibberish, as if there's some problem with the scanners, and it only comes out from 1 of the Pro. Any ideas ? I've tried all sorts of connection, connecting on separate ethernet to usb c/ ethernet to usb A/ connecting through router/ networkswitch etc, and also having all 3 on different connections. Tried on MAC/ Windows. Managed to try on a MAC (m1) using ver 5.0.4 also unable to project all 3. probably a problem that started on either ver 5.0.3/ ver 5.0.4
So another problem even on the 5.0.2, when I connect all 3 sometime it works sometimes it doesnt, eg. when I try to change custom kpps to 35000 the app hangs. bt when all 3 works, ITS MAGIC ! Please HELP !
(update) : Realised also when it works on the 5.0.2 when plugging in x2 LaserCube Pro 2.5W, when projecting same image, eg. 2 lines, 1 of the scanners will somehow have a very slight subtle flash/ darkening on the lines (something to do with scanners ?)