Hi
i just setted up a ws2815 ledstrip with the esp32 running WLED.
it's connected to my home network, and through the web.ui works properly.
it's my first time sending DMX over WIFI.
in the WLED Settings I tryied default sACN E1.31 and than ArtNet, rebooting the board when changing.
then i setted the fixture in MM, the Dmx output Device to SACN or Artnet as in WLED,
and the interface to the 192.168.1.6. as precompiled correctly.
no light out of the ledstrip.
so i tryied setting in the unicast parameters the ip of the board (192.168.1..
nothing.
what am I missing?
any suggestion??? thanks a lot