Teensy - LED's remain on white
  • lumatribe
    junior Member
    Posts: 2
    Joined: Fri Sep 03, 2021 1:10 am

    Teensy - LED's remain on white

    by lumatribe » Thu Sep 09, 2021 5:12 pm

    Hello!
    My FastLED test works no problem. The file from Madmapper's yourspace "serial-only-single-line" also works but when I send it to Teensy, all LED's are a mid-brightness white. Then as soon as madmapper is launched, they all go full bright white. I can see the shaders working on top of the already fully lit LED's. I feel like when I transfer the serial only single line to teensy, all the LED's should be off. Then the shaders in MM should work fine. If I bring the luminosity down, the shader disappears and the LED's remain bright white.

    I am using Teensy 4.0 and WS2812B Led's and the latest version of madmapper.

    Any help would be greatly appreciated. It's been 2 weeks and I feel defeated. I would pay for patreon help as well.

    Thank you!!!!

Who is online

Users browsing this forum: No registered users and 16 guests