I can’t connect MadMapper to the Enttec open DMX USB. I have tried the hardware, drivers and settings with another programm: Q Light Controller Plus (https://www.qlcplus.org/). It all works.
I believe the right way in MM is: preferences > DMX Output and then select the Entec from the DMX Output Device list. But it isn’t there (just Artnet, SACN and None)
I’m running MM 3.7.8 which isn’t the latest version of course but, as far as I know, should still be very able to use a DMX output.
BTW I made sure no other program was running when testing with MM.
I’ve checked manuals and posts on the forum but cannot figure out what I’m doing wrong. Help would be appreciated!
Robbert
P.S. Driver FTDI 2.12.36.4 is installed