garageCube

[desilenceStudio]

I have 25 meters of digital led strips with 144px/m to control. Only white/ monochrome color is needed.
In order to save on universes needed to drive the pixels - would it work assigning 1 channel pr. pixel instead of 3 in the fixture editor?
(it would ease the cabling and PixelLite boards as well having strips of 3m each instead of 1m)

3_vs_1.png (12.05 KiB) Viewed 4752 times

Cheers,
Søren

[sigmasix]

The addressing is happening in the LED. if your LEDs are RGB, you will have to select RGB in madmapper. otherwise you will have the white value of pixel 1 in the red channel of LED 1 and so on…

Some LEDs are white only, it might be useful for you.