Our minimad doesn't seems to respond to OSC messages when it's running in dmx/artnet mode ( the user guide says it supports /play, /pause, /replay, /previous_sequence, /next_sequence, etc. and I found on the forum somewhere that it's listening to port 1111).
During a test with video playback the OSC messages do work.
Note that we're using a USB-ethernet interface to connect the miniMAD to our router, while the main Ethernet port is connected to our light fixtures (artnet recordings are working; they automatically start playing at startup and using the keyboard we can jump between recordings).
I can ssh into the minimad and I used a python script on the minimad the verify that our OSC control messages are in fact arriving. I even tried receiving messages using a python script on a different port on the minimad and forwarding them to port 1111 locally (either targeting localhost or the IP address for the main ethernet port) but this also has no effect.
Does anybody have advice? Note that the reason why we're using a second ethernet port on the minimad is because it's hooked up to a rotating installation, together with the light fixtures and we'd like to avoid adding a router to the moving installation as well.