MiniMad with Advatek PixLite issues
Posted: Sun Mar 05, 2023 1:36 pm
Hello,
Just have problems to play sequences from MiniMad to Advatek PixLite. Advatek PixLite 4 MKII works fine with MadMapper, I can play all sequences from MadMapper. But once I transfer my sequences to SDCard, connect MiniMad to PixLite, it doesn't work. I tried a lot of combinations...
This is my setup:
PixLite static IP: 2.0.0.2 with 255.0.0.0 mask
MadMapper PC IP: 2.0.0.1 with 255.0.0.0 mask
MiniMad IP setting (from "MadLight Recorder" tab in MadMapper -> export to MiniMad -> network configuration->manual): 2.0.0.3 with 255.0.0.0 mask. (I tried also 2.0.0.1 with 255.0.0.0 like a PC setting but still doesn't works)
Then insert SDCard to MiniMad, disconnect ethernet cable from PC and connect it to MiniMad, then power on a MiniMad...nothing
A step-by-step manual of how to get this all to work would be greatly appreciated...
Just have problems to play sequences from MiniMad to Advatek PixLite. Advatek PixLite 4 MKII works fine with MadMapper, I can play all sequences from MadMapper. But once I transfer my sequences to SDCard, connect MiniMad to PixLite, it doesn't work. I tried a lot of combinations...
This is my setup:
PixLite static IP: 2.0.0.2 with 255.0.0.0 mask
MadMapper PC IP: 2.0.0.1 with 255.0.0.0 mask
MiniMad IP setting (from "MadLight Recorder" tab in MadMapper -> export to MiniMad -> network configuration->manual): 2.0.0.3 with 255.0.0.0 mask. (I tried also 2.0.0.1 with 255.0.0.0 like a PC setting but still doesn't works)
Then insert SDCard to MiniMad, disconnect ethernet cable from PC and connect it to MiniMad, then power on a MiniMad...nothing
A step-by-step manual of how to get this all to work would be greatly appreciated...