MINIMAD LIGHT error
  • angusmuirdesign
    junior Member
    Posts: 2
    Joined: Mon Apr 22, 2019 9:36 am

    MINIMAD LIGHT error

    by angusmuirdesign » Mon Apr 22, 2019 9:39 am

    Hi,

    I have been having many issues recently exporting to MINIMAD (artnet)
    The problems start a month or so ago, after using the software and exporting seamlessly many times.

    Everything works perfectly from MADMAPPER to artnet devices, then export shows to SD and then no output and red light flashes.

    Have tried it on new minimad with supplied SD cards, have flashed new ones, have tried old ones,
    Have updated madmapper and sd cards in the recorder.
    Have tried artnet, uni cast, direct ip, sacn all to no avail.

    Love some assistance! We use them all the time for so many of our artworks and no have a 5% strike rate and can't rely on them.
    please help!
  • Benoit
    ultim8 member
    Posts: 304
    Joined: Fri Jan 04, 2019 6:42 pm
    Location: Geneva

    Re: MINIMAD LIGHT error

    by Benoit » Mon Apr 22, 2019 11:01 am

    flashing the sd card (with the image disk from yourspace) solves 99% of the minimad's issues...

    regarding all you did/tried it may be a device issue,

    please contact the garagecube team through this page : http://www.garagecube.com/contact/
  • angusmuirdesign
    junior Member
    Posts: 2
    Joined: Mon Apr 22, 2019 9:36 am

    Re: MINIMAD LIGHT error

    by angusmuirdesign » Tue Apr 23, 2019 8:32 am

    Thanks,
    I am going to try it from my mac tonight.
    It does seem odd that even the 4 new MiniMads had issues - feels like maybe it is a laptop issue.
    Ill let you know thanks.
  • stphntylr
    junior Member
    Posts: 9
    Joined: Tue Oct 02, 2012 9:31 pm

    Re: MINIMAD LIGHT error

    by stphntylr » Sun Jun 30, 2019 7:58 pm

    Curious if you ever resolved this as I am having the exact same issue. Multiple minimads tried, multiple sd cards, Mac/pc exports.
  • franz
    madMapper master
    Posts: 1033
    Joined: Fri Feb 18, 2005 7:05 pm
    Location: Paris, France
    Contact:

    Re: MINIMAD LIGHT error

    by franz » Fri Dec 06, 2019 5:24 pm

    red flashing light means activation.
    connect a screen and activate your card.
  • Pierre Guilluy
    garageCube team
    Posts: 451
    Joined: Mon Oct 12, 2015 1:50 pm

    Re: MINIMAD LIGHT error

    by Pierre Guilluy » Fri Dec 06, 2019 11:03 pm

    FYI, the miniMAD will require activation (red, yellow, blue buttons press) every time you use a SD-card that was used in another miniMAD.

    I advice you label each SD-card to match its corresponding miniMAD so you don't have to activate anymore.

Who is online

Users browsing this forum: No registered users and 7 guests